DS16EV51-AEVKH_14 Datasheet, PDF (3/7 Pages) National Semiconductor (TI) – HDMI Extender Demo Kit for HDMI Cables

Quick Start Guide:
1. Connect 3.3V DC power to J4 and ground to J5 from the power supply.
Or, plug the AC/DC power adapter to the DC power Jack
AC/DC power adapter requirement: Output DC 4V~6V, Output current > 800mA
2. Attach two HDMI cables to the HDMI Input and Output Connectors
3. Turn on the DVD/Computer and the Monitor/HDTV.
Adjustment and Control Description
Component
Name
D1
PWR
D2
SD
J3
5V DC
J4
3.3V
J5
GND
J7
FEB
J8
CS
J10, J11
SDA, SDC
Loop Back
J9
Control
U3
Rotary Switch
Function
The LED turns on when 5V DC applies
The LED turns on when the DS16EV5110A does not detect clock signal
Optional DC Power Jack for 1.5 mm Adaptor Plug
3.3V VCC power supply
GND
Optional SMBus Control. See Datasheet.
Optional SMBus Control. See Datasheet
Optional SMBus access. See Datasheet
Connect “LED” and “SD” to enable D2 function.
Connect “SD” and “EN” to enable look back control function. When the clock
signal is not detected, the DS16EV5110A sets to power down mode.
Turn the switch to control the EQ boost setting. “0” on the switch refers to the
boost setting of “0X00”, “7” on the switch refers to the boost setting of “0X07”.
See datasheet for detail Boost setting information.
DS16EV51-AEVKH User Guide Rev A
August, 2008
3
© National Semiconductor Corporation