|
54ACT534 Datasheet, PDF (3/6 Pages) National Semiconductor (TI) – Octal D Flip-Flop with TRI-STATE Outputs | |||
|
◁ |
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Junction Temperature (TJ)
CDIP
Recommended Operating
175ËC
Supply Voltage (VCC)
DC Input Diode Current (IIK)
VI = â0.5V
VI = VCC + 0.5V
DC Input Voltage (VI)
DC Output Diode Current (IOK)
VO = â0.5V
VO = VCC + 0.5V
DC Output Voltage (VO)
DC Output Source
or Sink Current (IO)
DC VCC or Ground Current
per Output Pin (ICC or IGND)
Storage Temperature (TSTG)
â0.5V to +7.0V
â20 mA
+20 mA
â0.5V to VCC + 0.5V
â20 mA
+20 mA
â0.5V to VCC + 0.5V
±50 mA
±50 mA
â65ËC to +150ËC
Conditions
Supply Voltage (VCC)
âACT
4.5V to 5.5V
Input Voltage (VI)
Output Voltage (VO)
Operating Temperature (TA)
54ACT
0V to VCC
0V to VCC
â55ËC to +125ËC
Minimum Input Edge Rate (âV/ât)
âACT Devices
VIN from 0.8V to 2.0V
VCC @ 4.5V, 5.5V
125 mV/ns
Note 1: Absolute maximum ratings are those values beyond which damage
to the device may occur. The databook specifications should be met, without
exception, to ensure that the system design is reliable over its power supply,
temperature, and output/input loading variables. National does not recom-
mend operation of FACT⢠circuits outside databook specifications.
DC Characteristics for âACT Family Devices
Symbol
Parameter
VIH
Minimum High Level
Input Voltage
VIL
Maximum Low Level
Input Voltage
VOH
Minimum High Level
Output Voltage
54ACT
VCC
TA =
(V)
â55ËC to +125ËC
Guaranteed Limits
4.5
2.0
5.5
2.0
4.5
0.8
5.5
0.8
4.5
4.4
5.5
5.4
4.5
3.70
5.5
4.70
VOL
Maximum Low Level
4.5
0.1
Output Voltage
5.5
0.1
4.5
5.5
IIN
Maximum Input Leakage
5.5
Current
IOZ
Maximum TRI-STATE
5.5
Current
ICCT
Maximum ICC/Input
5.5
IOLD
Minimum Dynamic
5.5
IOHD
Output Current (Note 3)
5.5
ICC
Maximum Quiescent
5.5
Supply Current
Note 2: All outputs loaded; thresholds on input associated with output under test.
Note 3: Maximum test duration 2.0 ms, one output loaded at a time.
Note 4: ICC for 54ACT @ 25ËC is identical to 74ACT @ 25ËC.
0.50
0.50
±1.0
±5.0
1.6
50
â50
80.0
Units
Conditions
V
VOUT = 0.1V
or VCC â 0.1V
V
VOUT = 0.1V
or VCC â 0.1V
V
IOUT = â50 µA
(Note 2)
VIN = VIL or VIH
V
IOH = â24 mA
IOH = â24 mA
V
IOUT = 50 µA
(Note 2)
VIN = VIL or VIH
V
IOL = 24 mA
IOL = 24 mA
µA
VI = VCC, GND
µA
VI = VIL, VIH
VO = VCC, GND
mA
VI = VCC â 2.1V
mA
VOLD = 1.65V Max
mA
VOHD = 3.85V Min
µA
VIN = VCC
or GND
3
www.national.com
|
▷ |