LP38512_09 Datasheet, PDF (2/14 Pages) National Semiconductor (TI) – 1.5A Fast-Transient Response Low-Dropout Linear Voltage Regulator with Error Flag

Ordering Information
TABLE 1. Package Marking and Ordering Information
Output
Voltage
1.8
Order Number
LP38512TJ-1.8
LP38512TS-1.8
LP38512TSX-1.8
Package Type
TO263-5 THIN
TO263-5
TO263-5
Package Marking
LP38512TJ-1.8
LP38512TS-1.8
LP38512TS-1.8
Connection Diagrams
Supplied As:
Tape and Reel
Rail
Tape and Reel
Top View
TO-263 5 Pin Package
20183004
20183005
Top View
TO-263 THIN 5 Pin Package
Pin Descriptions for TO-263 and TO-263 THIN Packages
Pin #
1
2
3
4
5
TAB/DAP
Pin Name
EN
IN
GND
OUT
ERROR
TAB/DAP
Function
Enable. Pull high to enable the output, low to disable the output. This pin has no internal bias
and must be tied to the input voltage, or actively driven.
Input Supply Pin
Ground
Regulated Output Voltage Pin
ERROR Flag. A high level indicates that V_OUT is within typically 15% (V_OUT falling) of the
nominal regulated voltage.
The TO-263 TAB, and the TO-263 THIN DAP, is used as a thermal connection to remove
heat from the device to an external heatsink. The TAB/DAP is internally connected to device
pin 3, and is electrical ground connection.
www.national.com
2