LM3411 Datasheet, PDF (2/13 Pages) National Semiconductor (TI) – Precision Secondary Regulator/Driver

Connection Diagrams and Order Information
5-Lead Small Outline Package (M5)
Actual Size
DS011987-4
DS011987-3
*No internal connection, but should be soldered to PC board for best heat
transfer.
Top View
For Ordering Information
See Figure 1 in this Data Sheet
See NS Package Number MA05B
Five Lead Surface Mount Package Marking
and Order Information (SOT23-5)
The small SOT23-5 package allows only 4 alphanumeric characters to identify the product. The table below contains the field in-
formation marked on the package.
3.3V
3.3V
3.3V
3.3V
5.0V
5.0V
5.0V
5.0V
Grade
A (Prime)
A (Prime)
B (Standard)
B (Standard)
A (Prime)
A (Prime)
B (Standard)
B (Standard)
Order Information
LM3411AM5-3.3
LM3411AM5X-3.3
LM3411M5-3.3
LM3411M5X-3.3
LM3411AM5-5.0
LM3411AM5X-5.0
LM3411M5-5.0
LM3411M5X-5.0
Package
Marking
D00A
D00A
D00B
D00B
D01A
D01A
D01B
D01B
Supplied as
1000 unit increments on tape and reel
3000 unit increments on tape and reel
1000 unit increments on tape and reel
3000 unit increments on tape and reel
1000 unit increments on tape and reel
3000 unit increments on tape and reel
1000 unit increments on tape and reel
3000 unit increments on tape and reel
FIGURE 1. SOT23-5 Marking and Order Information
The first letter “D” identifies the part as a Driver, the next two numbers indicate the voltage, “00” for 3.3V part and “01” for a 5V
part. The fourth letter indicates the grade, “B” for standard grade, “A” for the prime grade.
The SOT23-5 surface mount package is only available on tape in quantities increments of 250 on tape and reel (indicated by the
letters “M5” in the part number), or in quantities increments of 3000 on tape and reel (indicated by the letters “M5X” in the part
number).
www.national.com
2