DS9637A_07 Datasheet, PDF (2/8 Pages) National Semiconductor (TI) – Dual Differential Line Receiver

Absolute Maximum Ratings (Note 2)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Storage Temperature Range
Ceramic DIP
−65°C to + 175°C
Molded DIP
−65°C to + 150°C
Lead Temperature
Ceramic DIP
(Soldering, 30 seconds)
300°C
Molded DIP and SO Package
(Soldering, 10 seconds)
265°C
Maximum Power Dissipation (Note 1) at 25°C
Cavity Package
1300 mW
Molded Package
930 mW
SO Package
810 mW
V_CC Lead Potential to Ground
Input Potential to Ground
−0.5V to 7.0V
±15V
Differential Input Voltage
Output Potential to Ground
Output Sink Current
ESD Susceptibility, HBM
±15V
−0.5V to +5.5V
50 mA
≥2 kV
Recommended Operating
Conditions
DS9637AM
Min Max Units
Supply Voltage (V_CC)
4.5 5.5
V
Operating Temperature (T_A) −55 +125 °C
DS9637AC
Supply Voltage (V_CC)
4.75 5.25
V
Operating Temperature (T_A)
0
+70
°C
Note 1: Derate cavity package 8.7 mW/°C above 25°C; derate molded DIP
package 7.5 mW/°C above 25°C; derate SO package 6.5 mW/°C above 25°
C.
Electrical Characteristics (Notes 3, 4)
Over recommended operating temperature and supply voltage ranges, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
V_TH
Differential Input
−7.0V ≤ V_CM ≤ +7.0V
Threshold Voltage (Note 6)
−0.2
V_TH(R)
Differential Input
Threshold Voltage (Note 7)
−7.0V ≤ V_CM ≤ +7.0V
−0.4
I_I
Input Current
(Note 8)
V_OL
Output Voltage LOW
V_OH
Output Voltage HIGH
I_OS
Output Short Circuit
Current (Note 5)
V_I = 10V, 0V ≤ V_CC ≤ +5.5V
V_I = −10V, 0V ≤ V_CC ≤ +5.5V
I_OL = 20 mA, V_CC = Min
I_OH = −1.0 mA, V_CC = Min
V_O = 0V, V_CC = Max
1.1
−1.6
0.35
2.5
3.5
−40
−75
I_CC
Supply Current
V_CC = Max, V_I+ = 0.5V,
35
V_I− = GND
V_HYST
Input Hysteresis
V_CM = ±7.0V (See Curves)
70
Max
+0.2
+0.4
3.25
−3.25
0.5
−100
50
Units
V
V
mA
V
V
mA
mA
mV
Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.
Note 3: Unless otherwise specified Min/Max limits apply across the −55°C to +125°C temperature range for DS9637AM and across the 0°C to +70°C range for
the DS9637ASC. All typicals are given for V_CC = 5V and T_A = 25°C.
Note 4: All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are referenced to ground unless otherwise
specified.
Note 5: Only one output at a time should be shorted.
Note 6: V_DIFF (Differential Input Voltage) = (V_I+) − (V_I−). V_CM (Common Mode Input Voltage) = V_I+ or V_I−.
Note 7: 500Ω ±1% in series with inputs.
Note 8: The input not under test is tied to ground.
Switching Characteristics
V_CC = 5.0V, T_A = 25°C
Symbol
Parameter
t_PLH
Propagation Delay Time
Low to High
t_PHL
Propagation Delay Time
High to Low
Conditions
See AC Test Circuit
See AC Test Circuit
Min
Typ
Max
Units
15
25
ns
13
25
ns
www.national.com
2