LME49723 Datasheet, PDF (14/24 Pages) National Semiconductor (TI) – Dual High Fidelity Audio Operational Amplifier

The LME49723 is a high speed op amp with excellent phase
margin and stability. Capacitive loads up to 100pF will cause
little change in the phase characteristics of the amplifiers and
are therefore allowable.
Capacitive loads greater than 100pF must be isolated from
the output. The most straightforward way to do this is to put
a resistor in series with the output. This resistor will also pre-
vent excess power dissipation if the output is accidentally
shorted.
Complete shielding is required to prevent induced pick up from external sources. Always check with oscilloscope for power line noise.
Noise Measurement Circuit
Total Gain: 115 dB @f = 1 kHz
Input Referred Noise Voltage: e_n = V0/560,000 (V)
RIAA Preamp Voltage Gain, RIAA
Deviation vs Frequency
Flat Amp Voltage Gain vs
Frequency
30036227
30036228
30036229
www.national.com
14