LP2980-ADJEP Datasheet, PDF (1/10 Pages) National Semiconductor (TI) – Micropower SOT, 50 mA Ultra Low-Dropout Adjustable Voltage Regulator

December 2006
LP2980-ADJEP
Micropower SOT, 50 mA Ultra Low-Dropout Adjustable
Voltage Regulator
General Description
The LP2980-ADJEP is a 50 mA adjustable voltage regulator
designed to provide ultra low dropout in battery powered ap-
plications.
Using an optimized VIP^® (vertically Integrated PNP) process,
the LP2980-ADJEP delivers unequalled performance in all
specifications critical to battery-powered designs:
Adjustable Output: output voltage can be set from 1.23V to
15V.
Precision Reference: 0.75% tolerance.
Dropout Voltage: typically 120 mV @ 50 mA load, and 7 mV
@ 1 mA load.
Ground Pin Current: typically 320 µA @ 50 mA load, and 80
µA @ 1 mA load.
Sleep Mode: less than 1 μA quiescent current when on/off
pin is pulled low.
Smallest Possible Size: SOT-23 package uses minimum
board space.
ENHANCED PLASTIC
• Extended Temperature Performance of -40°C to +125°C
• Baseline Control - Single Fab & Assembly Site
• Process Change Notification (PCN)
• Qualification & Reliability Data
• Solder (PbSn) Lead Finish is standard
• Enhanced Diminishing Manufacturing Sources (DMS)
Support
Features
■ ^{Ultra low dropout voltage}
■ ^{Output adjusts from 1.23V to 15V}
■ ^{Guaranteed 50 mA output current}
■ ^{Uses tiny SOT-23 package}
■ ^{Requires few external components}
■ <1 μA quiescent current when shutdown
■ ^{Low ground pin current at all loads}
■ ^{High peak current capability (150 mA typical)}
■ ^{Wide supply voltage range (2.5V–16V)}
■ ^{Overtemperature/overcurrent protection}
Applications
■ ^{Selected Military Applications}
■ ^{Selected Avionics Applications}
Order Information
PART NUMBER
LP2980IM5-ADJEP
(Notes 1, 2)
VID PART NUMBER
V62/07601-01XA
TBD
NS PACKAGE NUMBER (Note 3)
MF05A
TBD
Note 1: For the following (Enhanced Plastic) version, check for availability: LP2980IM5XADJEP
Note 2: FOR ADDITIONAL ORDERING AND PRODUCT INFORMATION, PLEASE VISIT THE ENHANCED PLASTIC WEB SITE AT: www.national.com/
mil
Note 3: Refer to package details under Physical Dimensions
VIP^® is a registered trademark of National Semiconductor Corporation.
© 2007 National Semiconductor Corporation 202070
www.national.com