LMV721 Datasheet, PDF (1/15 Pages) National Semiconductor (TI) – 10MHz, Low Noise, Low Voltage, and Low Power Operational Amplifier

August 1999
LMV721/LMV722
10MHz, Low Noise, Low Voltage, and Low Power
Operational Amplifier
General Description
The LMV721 (Single) and LMV722 (Dual) are low noise, low
voltage, and low power op amps, that can be designed into
a wide range of applications. The LMV721/LMV722 has a
unity gain bandwidth of 10MHz, a slew rate of 5V/us, and a
quiescent current of 930uA/amplifier at 2.2V.
The LMV721/722 are designed to provide optimal perfor-
mance in low voltage and low noise systems. They provide
rail-to-rail output swing into heavy loads. The input
common-mode voltage range includes ground, and the
maximum input offset voltage are 3.5mV (Over Temp.) for
the LMV721/LMV722. Their capacitive load capability is also
good at low supply voltages. The operating range is from
2.2V to 5.5V.
The chip is built with National’s advanced Submicron
Silicon-Gate BiCMOS process. The single version, LMV721,
is available in 5 pin SOT23-5 and a SC-70 (new) package.
The dual version, LMV722, is available in a SO-8 and
MSOP-8 package.
Features
(For Typical, 5 V Supply Values; Unless Otherwise Noted)
n Guaranteed 2.2V and 5.0V Performance
n Low Supply Current LMV721/2 930µA/amplifier @2.2V
n High Unity-Gain Bandwidth 10MHz
n Rail-to-Rail Output Swing
@600Ω load 120mV from either rail at 2.2V
@2kΩ load 50mV from either rail at 2.2V
n Input Common Mode Voltage Range Includes Ground
n Silicon Dust™, SC70-5 Package 2.0x2.0x1.0 mm
n Input Voltage Noise 9 @ f = 1KHz
Applications
n Cellular an Cordless Phones
n Active Filter and Buffers
n Laptops and PDAs
n Battery Powered Electronics
Connection Diagrams
5-Pin SC-70/SOT23-5
8-Pin SO/MSOP
DS100922-99
Top View
DS100922-63
Top View
Silicon Dust™ is a trademark of National Semiconductor Corporation.
© 1999 National Semiconductor Corporation DS100922
www.national.com