LMV716 Datasheet, PDF (1/15 Pages) National Semiconductor (TI) – 5 MHz, Low Noise, RRO, Dual Operational Amplifier with CMOS Input

September 2006
LMV716
5 MHz, Low Noise, RRO, Dual Operational Amplifier with
CMOS Input
General Description
The LMV716 is a dual operational amplifier with both low
supply voltage and low supply current, making it ideal for
portable applications. The LMV716 CMOS input stage drives
the I_BIAS current down to 0.6 pA; this coupled with the low
noise voltage of 12.8 nV/
makes the LMV716 perfect
for applications requiring active filters, transimpedance am-
plifiers, and HDD vibration cancellation circuitry.
Along with great noise sensitivity, small signal applications
will benefit from the large gain bandwidth of 5 MHz coupled
with the minimal supply current of 1.6 mA and a slew rate of
5.8 V/µs.
The LMV716 provides rail-to-rail output swing into heavy
loads. The input common-mode voltage range includes
ground, which is ideal for ground sensing applications.
The LMV716 has a supply voltage spanning 2.7V to 5V and
is offered in an 8-pin MSOP package that functions across
the wide temperature range of −40˚C to 85˚C. This small
package makes it possible to place the LMV716 next to
sensors, thus reducing external noise pickup.
Features
(Typical values, V⁺ = 3.3V, T_A = 25˚C, unless otherwise
specified)
n Input noise voltage
12.8 nV/
n Input bias current
0.6 pA
n Offset voltage
1.6 mV
n CMRR
80 dB
n Open loop gain
122 dB
n Rail-to-rail output
n GBW
5 MHz
n Slew rate
5.8 V/µs
n Supply current
1.6 mA
n Supply voltage range
2.7V to 5V
n Operating temperature
−40˚C to 85˚C
n 8-pin MSOP package
Applications
n Active filters
n Transimpedance amplifiers
n Audio preamp
n HDD vibration cancellation circuitry
Typical Application Circuit
High Gain Band Pass Filter
© 2006 National Semiconductor Corporation DS201795
20179539
www.national.com