LMV321-N Datasheet, PDF (1/45 Pages) National Semiconductor (TI) – Single/Dual/Quad General Purpose, Low Voltage, Rail-to-Rail Output Operational Amplifiers

www.ti.com
LMV321-N, LMV321-N-Q1, LMV358-N, LMV358-N-Q1
LMV324-N, LMV324-N-Q1
SNOS012I – AUGUST 2000 – REVISED FEBRUARY 2013
LMV321-N/LMV321-N-Q1/LMV358-N/LMV358-N-Q1/LMV324-N/LMV324-N-Q1
Single/Dual/Quad General Purpose, Low Voltage, Rail-to-Rail Output Operational
Amplifiers
Check for Samples: LMV321-N, LMV321-N-Q1, LMV358-N, LMV358-N-Q1, LMV324-N, LMV324-N-Q1
FEATURES
1
• (For V⁺ = 5V and V^− = 0V, unless otherwise
specified)
• LMV321-N, LMV358-N, and LMV324-N are
available in Automotive AEC-Q100 Grade 1 & 3
versions
• Guaranteed 2.7V and 5V performance
• No crossover distortion
• Industrial temperature range −40°C to +125°C
• Gain-bandwidth product 1 MHz
• Low supply current
• LMV321-N 130 μA
• LMV358-N 210 μA
• LMV324-N 410 μA
• Rail-to-rail output swing @ 10 kΩ V⁺− 10 mV &
V^−+ 65 mV
• V_CM Range −0.2V to V⁺− 0.8V
APPLICATIONS
• Active filters
• General purpose low voltage applications
• General purpose portable devices
Gain and Phase vs. Capacitive Load
DESCRIPTION
The LMV358-N/LMV324-N are low voltage (2.7V to
5.5V) versions of the dual and quad commodity op
amps LM358/LM324 (5V to 30V). The LMV321-N is
the single channel version. The LMV321-N/LMV358-
N/LMV324-N are the most cost effective solutions for
applications where low voltage operation, space
efficiency, and low price are important. They offer
specifications that meet or exceed the familiar
LM358/LM324. The LMV321-N/LMV358-N/LMV324-N
have rail-to-rail output swing capability and the input
common-mode voltage range includes ground. They
all exhibit excellent speed to power ratio, achieving 1
MHz of bandwidth and 1 V/µs slew rate with low
supply current.
The LMV321-N is available in the space saving 5-Pin
SC70, which is approximately half the size of the 5-
Pin SOT23. The small package saves space on PC
boards and enables the design of small portable
electronic devices. It also allows the designer to place
the device closer to the signal source to reduce noise
pickup and increase signal integrity.
The chips are built with Texas Instruments's
advanced submicron silicon-gate BiCMOS process.
The LMV321-N/LMV358-N/LMV324-N have bipolar
input and output stages for improved noise
performance and higher output current drive.
Output Voltage Swing vs. Supply Voltage
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2013, Texas Instruments Incorporated