LM5030_05 Datasheet, PDF (1/12 Pages) National Semiconductor (TI) – 100V Push-Pull Current Mode PWM Controller

March 2005
LM5030
100V Push-Pull Current Mode PWM Controller
General Description
The LM5030 High Voltage PWM controller contains all of the
features needed to implement Push-Pull and Bridge topolo-
gies, using current-mode control in a small 10 pin package.
This device provides two alternating gate driver outputs. The
LM5030 includes a high-voltage start-up regulator that oper-
ates over a wide input range of 14V to 100V. Additional
features include: error amplifier, precision reference, dual
mode current limit, slope compensation, softstart, sync ca-
pability and thermal shutdown. This high speed IC has total
propagation delays less than 100ns and a 1MHz capable
single resistor adjustable oscillator.
Package: MSOP-10 and thermally enhanced LLP-10 (4mm
x 4mm).
Features
n Internal High Voltage Start-up Regulator
n Single Resistor Oscillator Setting
n Synchronizable
n Error Amplifier
n Precision Reference
n Adjustable Softstart
n Dual Mode Over-Current Protection
n Slope Compensation
n Direct Optocoupler Interface
n 1.5A Peak Gate Drivers
n Thermal Shutdown
Applications
n Telecommunication Power Converters
n Industrial Power Converters
n +42V Automotive Systems
Connection Diagram
Top View
20058112
10-Lead MSOP, LLP
Ordering Information
Order Number
LM5030MM
LM5030MMX
LM5030SD
LM5030SDX
Package Type
MSOP-10
MSOP-10
LLP-10
LLP-10
NSC Package Drawing
MUB10A
MUB10A
SDC10A
SDC10A
Supplies As
1000 Units on Tape and Reel
3500 Units on Tape and Reel
1000 Units on Tape and Reel
4500 Units on Tape and Reel
© 2005 National Semiconductor Corporation DS200581
www.national.com