LM5022_09 Datasheet, PDF (1/22 Pages) National Semiconductor (TI) – 60V Low Side Controller for Boost and SEPIC

LM5022
October 7, 2009
60V Low Side Controller for Boost and SEPIC
General Description
The LM5022 is a high voltage low-side N-channel MOSFET
controller ideal for use in boost and SEPIC regulators. It con-
tains all of the features needed to implement single ended
primary topologies. Output voltage regulation is based on
current-mode control, which eases the design of loop com-
pensation while providing inherent input voltage feed-forward.
The LM5022 includes a start-up regulator that operates over
a wide input range of 6V to 60V. The PWM controller is de-
signed for high speed capability including an oscillator fre-
quency range up to 2 MHz and total propagation delays less
than 100 ns. Additional features include an error amplifier,
precision reference, line under-voltage lockout, cycle-by-cy-
cle current limit, slope compensation, soft-start, external syn-
chronization capability and thermal shutdown. The LM5022 is
available in the MSOP-10 package.
Features
■ ^{Internal 60V Startup Regulator}
■ ^{1A Peak MOSFET Gate Driver}
■ ^V_IN ^{Range 6V to 60V}
■ ^{Duty Cycle Limit of 90%}
■ ^{Programmable UVLO with Hysteresis}
■ ^{Cycle-by-Cycle Current Limit}
■ ^{External Synchronizable (AC-coupled)}
■ ^{Single Resistor Oscillator Frequency Set}
■ ^{Slope Compensation}
■ ^{Adjustable Soft-start}
■ ^{MSOP-10 Package}
Applications
■ ^{Boost Converter}
■ ^{SEPIC Converter}
Typical Application
© 2009 National Semiconductor Corporation 202122
20212201
www.national.com