LM5009_08 Datasheet, PDF (1/16 Pages) National Semiconductor (TI) – 150 mA, 100V Step-Down Switching Regulator

February 5, 2008
LM5009
150 mA, 100V Step-Down Switching Regulator
General Description
The LM5009 Step Down Switching Regulator features all of
the functions needed to implement a low cost, efficient, Buck
bias regulator. This device is capable of driving a 150 mA load
current from a 9.5V to 95V input source. The switching fre-
quency can exceed 600 kHz, depending on the input and
output voltages. The output voltage may be set from 2.5V to
85V. This high voltage regulator contains an N-Channel buck
switch and internal startup regulator. The device is easy to
implement and is provided in the MSOP-8 and the thermally
enhanced LLP-8 packages. The LM5009 is a well suited al-
ternative to a high voltage monolithic or discrete linear solu-
tion where the power loss becomes unacceptable. The
regulator’s operation is based on a hysteretic control scheme
using an ON time inversely proportional to VIN. This feature
allows the operating frequency to remain relatively constant
over load and input voltage variations. The hysteretic control
requires no loop compensation, resulting in an ultra-fast tran-
sient response. An intelligent current limit is implemented with
forced OFF time, which is inversely proportional to Vout. This
scheme ensures short circuit protection while providing min-
imum foldback. Other features include: Thermal Shutdown,
Vcc under-voltage lockout, Gate drive under-voltage lockout,
and Maximum Duty Cycle limiter.
Features
■ ^{Integrated N-Channel MOSFET}
■ ^{Guaranteed 150 mA output current capability}
■ ^{Ultra-Fast Transient Response}
■ ^{No loop compensation required}
■ ^{Vin feed forward provides constant operating frequency}
■ ^{Switching frequency can exceed 600 kHz}
■ ^{Highly efficient operation}
■ ^{2% accurate 2.5V feedback from -40°C to 125°C}
■ ^{Internal startup regulator}
■ ^{Intelligent current limit protection}
■ ^{External shutdown control}
■ ^{Thermal shutdown}
■ ^{MSOP-8 and thermally enhanced LLP packages}
Typical Applications
■ ^{Heat sink eliminator for classic linear regulator}
applications
■ ^{12V, 24V, 36V, and 48V rectified AC systems}
■ ^{42V Automotive}
■ ^{Non-isolated AC mains charge coupled supplies}
■ ^{LED Current Source}
Package
■ ^{MSOP - 8}
■ ^{LLP - 8 (4mm x 4mm)}
Typical Application Circuit
Basic Stepdown Regulator
© 2008 National Semiconductor Corporation 201658
20165828
www.national.com