LM4852 Datasheet, PDF (1/21 Pages) National Semiconductor (TI) – Integrated Audio Amplifier System

May 2004
LM4852
Integrated Audio Amplifier System
General Description
The LM4852 is an audio power amplifier system capable of
delivering 1.1W (typ) of continuous average power into a
mono 8Ω bridged-tied load (BTL) with 1% THD+N and
60mW (typ) per channel of continuous average power into
stereo 32Ω single-ended (SE) loads with 0.5% THD+N, us-
ing a 5V power supply.
The LM4852 features a 32 step digital volume control and
eight distinct output modes. The digital volume control and
output modes are programmed through a two-wire I²C com-
patible control interface, that allows flexibility in routing and
mixing audio channels. The LM4852 has 3 channels: one
pair for a two-channel stereo signal and the third for a
single-channel mono input.
The LM4852 is designed for cellular phone, PDA, and other
portable handheld applications. It delivers high quality output
power from a surface-mount package and requires only
seven external components.
The industry leading micro SMD package only utilizes 2mm
x 2.3mm of PCB space, making the LM4852 the most space
efficient audio sub system available today.
Key Specifications
n THD+N at 1kHz, 1.1W into 8Ω BTL
n THD+N at 1kHz, 60mW into 32Ω SE
n Single Supply Operation
1.0% (typ)
0.5% (typ)
2.6 to 5.0V
Features
n 1.1W (typ) output power with 8Ω mono BTL load
n 60mW (typ) output power with stereo 32Ω SE loads
n I²C programmable 32 step digital volume control
(-40.5dB to +6dB)
n Eight distinct output modes
n micro-SMD and LLP surface mount packaging
n "Click and Pop" suppression circuitry
n Thermal shutdown protection
n Low shutdown current (0.1uA, typ)
Applications
n Moblie Phones
n PDAs
Typical Application
FIGURE 1. Typical Audio Amplifier Application Circuit
20060632
Boomer^® is a registered trademark of National Semiconductor Corporation.
© 2004 National Semiconductor Corporation DS200606
www.national.com