LM4810 Datasheet, PDF (1/18 Pages) National Semiconductor (TI) – Dual 105mW Headphone Amplifier with Active-High Shutdown Mode

November 2002
LM4810
Dual 105mW Headphone Amplifier with Active-High
Shutdown Mode
General Description
The LM4810 is a dual audio power amplifier capable of
delivering 105mW per channel of continuous average power
into a 16Ω load with 0.1% (THD+N) from a 5V power supply.
Boomer audio power amplifiers were designed specifically to
provide high quality output power with a minimal amount of
external components. Since the LM4810 does not require
bootstrap capacitors or snubber networks, it is optimally
suited for low-power portable systems.
The unity-gain stable LM4810 can be configured by external
gain-setting resistors.
The LM4810 features an externally controlled, active-high,
micropower consumption shutdown mode, as well as an
internal thermal shutdown protection mechanism.
Key Specifications
n THD+N at 1kHz, 105mW continuous average power into
16Ω
0.1% (typ)
n THD+N at 1kHz, 70mW continuous average power into
32Ω
0.1% (typ)
n Shutdown Current
0.4µA (typ)
Features
n Active-high shutdown mode
n LLP, MSOP, and SO surface mount packaging
n "Click and Pop" suppression circuitry
n Low shutdown current
n No bootstrap capacitors required
n Unity-gain stable
Applications
n Cellular Phones
n Personal Computers
n Microphone Preamplifier
n PDA’s
Typical Application
20008901
*Refer to the Application Information Section for information concerning proper selection of the input and output coupling capacitors.
FIGURE 1. Typical Audio Amplifier Application Circuit
Boomer^® is a registered trademark of National Semiconductor Corporation.
© 2002 National Semiconductor Corporation DS200089
www.national.com