LM4808 Datasheet, PDF (1/13 Pages) National Semiconductor (TI) – Dual 105 mW Headphone Amplifier

February 2000
LM4808
Dual 105 mW Headphone Amplifier
General Description
The LM4808 is a dual audio power amplifier capable of deliv-
ering 105 mW per channel of continuous average power into
a 16Ω load with 0.1% (THD+N) from a 5V power supply.
Boomer audio power amplifiers were designed specifically to
provide high quality output power with a minimal amount of
external components using surface mount packaging. Since
the LM4808 does not require bootstrap capacitors or snub-
ber networks, it is optimally suited for low-power portable
systems.
The unity-gain stable LM4808 can be configured by external
gain-setting resistors.
Key Specifications
n THD+N at 1 kHz at 105 mW
continuous average output
power into 16Ω
n THD+N at 1 kHz at 70 mW
continuous average output
power into 32Ω
n Output power at 0.1% THD+N
at 1 kHz into 32Ω
0.1% (max)
0.1% (typ)
70 mW (typ)
Features
n SOP and MSOP surface mount packaging
n Switch on/off click suppression
n Excellent power supply ripple rejection
n Unity-gain stable
n Minimum external components
Applications
n Headphone Amplifier
n Personal Computers
n Microphone Preamplifier
Typical Application
Connection Diagram
SOP & MSOP Package
DS101276-2
Top View
Order Number LM4808M, LM4808MM
See NS Package Number M08A, MUA08A
DS101276-1
*Refer to the Application Information Section for information concerning
proper selection of the input and output coupling capacitors.
FIGURE 1. Typical Audio Amplifier Application Circuit
Boomer^® is a registered trademark of National Semiconductor Corporation.
© 2000 National Semiconductor Corporation DS101276
www.national.com