|
LM4733 Datasheet, PDF (1/23 Pages) National Semiconductor (TI) – 3 Channel 30W Audio Power Amplifier with Mute | |||
|
September 2003
LM4733
3 Channel 30W Audio Power Amplifier with Mute
General Description
The LM4733 is a three channel audio amplifier capable of
typically delivering 30W per channel of continuous average
output power into a 4⦠or 8⦠load with less than 10%
THD+N from 20Hz - 20kHz.
The LM4733 has short circuit protection and a thermal shut
down feature that is activated when the die temperature
exceeds 150ËC. The LM4733 also has an under voltage lock
out feature for click and pop free power on and off.
Each amplifier of the LM4733 has an independent smooth
transition fade-in/out mute.
The LM4733 has a wide operating supply range from ±10V
- ±32V allowing for lower cost unregulated power supplies to
be used.
The LM4733 amplifiers can easily be configured for bridge or
parallel operation for higher power and bi-amp solutions
Key Specifications
j Output Power/Channel at 10% THD+N,
1kHz into 4⦠or 8â¦
j THD+N at 3 x 1W into 8â¦, 1kHz
j Mute Attenuation
j PSRR
j Slew Rate
30W (typ)
0.03% (typ)
110dB (typ)
85dB (typ)
9V/µs (typ)
Features
n Low external component count
n Quiet fade-in/out mute mode
n Wide supply range: 20V - 64V
Applications
n Audio amplifier for component stereo
n Audio amplifier for compact stereo
n Audio amplifier for self-powered speakers
n Audio amplifier for high-end and HD TVs
Typical Application
200794B5
FIGURE 1. Typical Audio Amplifier Application Circuit
© 2003 National Semiconductor Corporation DS200794
www.national.com
|
▷ |