LM45_05 Datasheet, PDF (1/11 Pages) National Semiconductor (TI) – SOT-23 Precision Centigrade Temperature Sensors

August 2005
LM45
SOT-23 Precision Centigrade Temperature Sensors
General Description
The LM45 series are precision integrated-circuit temperature
sensors, whose output voltage is linearly proportional to the
Celsius (Centigrade) temperature. The LM45 does not re-
quire any external calibration or trimming to provide accura-
cies of ±2˚C at room temperature and ±3˚C over a full −20 to
+100˚C temperature range. Low cost is assured by trimming
and calibration at the wafer level. The LM45’s low output
impedance, linear output, and precise inherent calibration
make interfacing to readout or control circuitry especially
easy. It can be used with a single power supply, or with plus
and minus supplies. As it draws only 120 µA from its supply,
it has very low self-heating, less than 0.2˚C in still air. The
LM45 is rated to operate over a −20˚ to +100˚C temperature
range.
Applications
n Battery Management
n FAX Machines
n Printers
n Portable Medical Instruments
n HVAC
n Power Supply Modules
n Disk Drives
n Computers
n Automotive
Features
n Calibrated directly in ˚ Celsius (Centigrade)
n Linear + 10.0 mV/˚C scale factor
n ±3˚C accuracy guaranteed
n Rated for full −20˚ to +100˚C range
n Suitable for remote applications
n Low cost due to wafer-level trimming
n Operates from 4.0V to 10V
n Less than 120 µA current drain
n Low self-heating, 0.20˚C in still air
n Nonlinearity only ±0.8˚C max over temp
n Low impedance output, 20Ω for 1 mA load
Connection Diagram
SOT-23
01175401
Top View
See NS Package Number mf03a
Order
Number
LM45BIM3
LM45BIM3X
LM45CIM3
LM45CIM3X
Device
Top Mark
T4B
T4B
T4C
T4C
Supplied As
1000 Units on Tape and Reel
3000 Units on Tape and Reel
1000 Units on Tape and Reel
3000 Units on Tape and Reel
© 2005 National Semiconductor Corporation DS011754
www.national.com