LM3886_03 Datasheet, PDF (1/24 Pages) National Semiconductor (TI) – Overture TM Audio Power Amplifier Series High-Performance 68W Audio Power Amplifier w/Mute

October 2003
LM3886 Overture^™ Audio Power Amplifier Series
High-Performance 68W Audio Power Amplifier w/Mute
General Description
The LM3886 is a high-performance audio power amplifier
capable of delivering 68W of continuous average power to a
4Ω load and 38W into 8Ω with 0.1% THD+N from
20Hz–20kHz.
The performance of the LM3886, utilizing its Self Peak In-
stantaneous Temperature (˚Ke) (SPiKe™) protection cir-
cuitry, puts it in a class above discrete and hybrid amplifiers
by providing an inherently, dynamically protected Safe Op-
erating Area (SOA). SPiKe protection means that these
parts are completely safeguarded at the output against ov-
ervoltage, undervoltage, overloads, including shorts to the
supplies, thermal runaway, and instantaneous temperature
peaks.
The LM3886 maintains an excellent signal-to-noise ratio of
greater than 92dB with a typical low noise floor of 2.0µV. It
exhibits extremely low THD+N values of 0.03% at the rated
output into the rated load over the audio spectrum, and
provides excellent linearity with an IMD (SMPTE) typical
rating of 0.004%.
n 135W instantaneous peak output power capability
n Signal-to-Noise Ratio ≥ 92dB
n An input mute function
n Output protection from a short to ground or to the
supplies via internal current limiting circuitry
n Output over-voltage protection against transients from
inductive loads
n Supply under-voltage protection, not allowing internal
biasing to occur when |V_EE| + |V_CC| ≤ 12V, thus
eliminating turn-on and turn-off transients
n 11-lead TO-220 package
n Wide supply range 20V - 94V
Applications
n Component stereo
n Compact stereo
n Self-powered speakers
n Surround-sound amplifiers
n High-end stereo TVs
Features
n 68W cont. avg. output power into 4Ω at V_CC = ±28V
n 38W cont. avg. output power into 8Ω at V_CC = ±28V
n 50W cont. avg. output power into 8Ω at V_CC = ±35V
Typical Application
01183301
*Optional components dependent upon specific design requirements. Refer to the External Components Description section for a component functional
description.
FIGURE 1. Typical Audio Amplifier Application Circuit
Overture™ and SPiKe ™ Protection are trademarks of National Semiconductor Corporation.
© 2003 National Semiconductor Corporation DS011833
www.national.com