|
LM34919_08 Datasheet, PDF (1/18 Pages) National Semiconductor (TI) – Ultra Small 40V, 600 mA Constant On-Time Buck Switching Regulator | |||
|
June 2, 2008
LM34919
Ultra Small 40V, 600 mA Constant On-Time Buck Switching
Regulator
General Description
The LM34919 Step Down Switching Regulator features all of
the functions needed to implement a low cost, efficient, buck
bias regulator capable of supplying 0.6A to the load. This buck
regulator contains an N-Channel Buck Switch, and is avail-
able in a micro SMD package. The constant on-time feedback
regulation scheme requires no loop compensation, results in
fast load transient response, and simplifies circuit implemen-
tation. The operating frequency remains constant with line
and load variations due to the inverse relationship between
the input voltage and the on-time. The valley current limit re-
sults in a smooth transition from constant voltage to constant
current mode when current limit is detected, reducing the fre-
quency and output voltage, without the use of foldback. Ad-
ditional features include: VCC under-voltage lockout, thermal
shutdown, gate drive under-voltage lockout, and maximum
duty cycle limiter.
Features
â Integrated N-Channel buck switch
â Integrated start-up regulator
â Input Voltage Range: 8V to 40V
â No loop compensation required
â Ultra-Fast transient response
â Operating frequency remains constant with load current
and input voltage
â Maximum switching frequency: 2.0 MHz
â Maximum Duty Cycle Limited During Start-Up
â Adjustable output voltage
â Valley Current Limit At 0.64A
â Precision internal reference
â Low bias current
â Highly efficient operation
â Thermal shutdown
Typical Applications
â High Efficiency Point-Of-Load (POL) Regulator
â Non-Isolated Telecommunication Buck Regulator
â Secondary High Voltage Post Regulator
Package
â micro SMD
Basic Step Down Regulator
© 2008 National Semiconductor Corporation 300044
30004431
www.national.com
|
▷ |