LM2903EP Datasheet, PDF (1/14 Pages) National Semiconductor (TI) – Low Power Low Offset Voltage Dual Comparators

LM2903EP
OBSOLETE
September 29, 2009
Low Power Low Offset Voltage Dual Comparators
General Description
The LM2903EP consists of two independent precision volt-
age comparators with an offset voltage specification as low
as 2.0 mV max for two comparators which were designed
specifically to operate from a single power supply over a wide
range of voltages. Operation from split power supplies is also
possible and the low power supply current drain is indepen-
dent of the magnitude of the power supply voltage. This
comparator also has a unique characteristic in that the input
common-mode voltage range includes ground, even though
operated from a single power supply voltage.
Application areas include limit comparators, simple analog to
digital converters; pulse, squarewave and time delay gener-
ators; wide range VCO; MOS clock timers; multivibrators and
high voltage digital logic gates. The LM2903EP was designed
to directly interface with TTL and CMOS. When operated from
both plus and minus power supplies, the LM2903EP will di-
rectly interface with MOS logic where their low power drain is
a distinct advantage over standard comparators.
ENHANCED PLASTIC
• Extended Temperature Performance of −40°C to +85°C
• Baseline Control - Single Fab & Assembly Site
• Process Change Notification (PCN)
• Qualification & Reliability Data
• Solder (PbSn) Lead Finish is standard
• Enhanced Diminishing Manufacturing Sources (DMS)
Support
Advantages
■ ^{High precision comparators}
■ ^{Reduced V}_OS ^{drift over temperature}
■ ^{Eliminates need for dual supplies}
■ ^{Allows sensing near ground}
■ ^{Compatible with all forms of logic}
■ ^{Power drain suitable for battery operation}
Features
■ ^{Wide supply}
— Voltage range:
2.0V to 36V
— Single or dual supplies:
±1.0V to ±18V
■ ^{Very low supply current drain (0.4 mA) — independent of}
supply voltage
■ ^{Low input biasing current:}
25 nA
■ ^{Low input offset current:}
±5 nA
■ ^{Maximum offset voltage:}
±3 mV
■ ^{Input common-mode voltage range includes ground}
■ ^{Differential input voltage range equal to the power supply}
voltage
■ ^{Low output saturation voltage,:}
250 mV at 4 mA
■ ^{Output voltage compatible with TTL, DTL, ECL, MOS and}
CMOS logic systems
Applications
■ ^{Selected Military Applications}
■ ^{Selected Avionics Applications}
Ordering Information
PART NUMBER
LM2903MEP
(Note 1, Note 2)
VID PART NUMBER
V62/04745-01
TBD
NS PACKAGE NUMBER (Note 3)
M08A
TBD
Note 1: For the following (Enhanced Plastic) version, check for availability: - LM2903MXEP, LM2903NEP, LM2903ITLEP, LM2903ITLXEP. Parts
listed with an "X" are provided in Tape & Reel and parts without an "X" are in Rails.
Note 2: FOR ADDITIONAL ORDERING AND PRODUCT INFORMATION, PLEASE VISIT THE ENHANCED PLASTIC WEB SITE AT: www.national.com/
mil
Note 3: Refer to package details under Physical Dimensions
© 2009 National Semiconductor Corporation 201141
201141 Version 3 Revision 1 Print Date/Time: 2009/09/29 16:01:39
www.national.com