|
LM2412A Datasheet, PDF (1/11 Pages) National Semiconductor (TI) – Monolithic Triple 2.8 ns CRT Driver | |||
|
February 2001
LM2412A
Monolithic Triple 2.8 ns CRT Driver
General Description
The LM2412A is an integrated high voltage CRT driver circuit
designed for use in high resolution color monitor applica-
tions. The IC contains three high input impedance, wide
band amplifiers which directly drive the RGB cathodes of a
CRT. Each channel has its gain internally set to â14 and can
drive CRT capacitive loads as well as resistive loads pre-
sented by other applications, limited only by the packageâs
power dissipation.
The IC is packaged in an industry standard 11 lead TO-220
molded plastic power package. See thermal considerations
section for heat sinking requirements.
Features
n Rise/fall times typically 2.8 ns with 8 pF load at 40 VPP
n Faster Maximum Rise/Fall time than LM2412, 3.2nsec
vs 3.5nsec.
n Well matched with LM2202 video preamps
n Output swing capability: 50 VPP for VCC = 80V
n 1V to 5V input range
n Stable with 0-20 pF capacitive loads and inductive
peaking networks
n Convenient TO-220 staggered lead package style
n Standard LM240X family pinout which is designed for
easy PCB layout
Applications
n CRT driver for color monitors with display resolutions up
to 1600 x 1200 with 85 Hz refresh rate
n Pixel clock frequency up to 200 MHz
Schematic and Connection Diagrams
DS200124-1
FIGURE 1. Simplified Schematic Diagram
(One Channel)
DS200124-2
Top View
Order Number LM2412ATA
See NS package Number
© 2001 National Semiconductor Corporation DS200124
www.national.com
|
▷ |