LM111JAN Datasheet, PDF (1/26 Pages) National Semiconductor (TI) – Voltage Comparator

April 2, 2008
LM111JAN
Voltage Comparator
General Description
The LM111 is a voltage comparator that has input currents
nearly a thousand times lower than devices such as the
LM106 or LM710. It is also designed to operate over a wider
range of supply voltages: from standard ±15V op amp sup-
plies down to the single 5V supply used for IC logic. The
output is compatible with RTL, DTL and TTL as well as MOS
circuits. Further, it can drive lamps or relays, switching volt-
ages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111 can be isolated
from system ground, and the output can drive loads referred
to ground, the positive supply or the negative supply. Offset
balancing and strobe capability are provided and outputs can
be wire OR'ed. Although slower than the LM106 and LM710
(200 ns response time vs 40 ns) the device is also much less
prone to spurious oscillations. The LM111 has the same pin
configuration as the LM106 and LM710.
Features
■ ^{Operates from single 5V supply}
■ ^{Input current: 200 nA max. over temperature}
■ ^{Offset current: 20 nA max. over temperature}
■ ^{Differential input voltage range: ±30V}
■ ^{Power consumption: 135 mW at ±15V}
■ ^{Power supply voltage, single 5V to ±15V}
■ ^{Offset voltage null capability}
■ ^{Strobe capability}
Ordering Information
NS PART NUMBER
JL111BCA
JL111BGA
JL111BHA
JL111BPA
JL111SGA
JL111SHA
JL111SPA
JL111SZA
JAN PART NUMBER
JM38510/10304BCA
JM38510/10304BGA
JM38510/10304BHA
JM38510/10304BPA
JM38510/10304SGA
JM38510/10304SHA
JM38510/10304SPA
JM38510/10304SZA
NS PACKAGE NUMBER
J14A
H08C
W10A
J08A
H08C
W10A
J08A
WG10A
PACKAGE DESCRIPTION
14LD CERDIP
8LD TO-99 Metal Can
10LD CERPACK
8LD CERDIP
8LD TO-99 Metal Can
10LD CERPACK
8LD CERDIP
10LD Ceramic SOIC
© 2008 National Semiconductor Corporation 201420
www.national.com