LM107 Datasheet, PDF (1/10 Pages) National Semiconductor (TI) – Operational Amplifiers

December 1994
LM107 LM207 LM307 Operational Amplifiers
General Description
The LM107 series are complete general purpose operation-
al amplifiers with the necessary frequency compensation
built into the chip Advanced processing techniques make
the input currents a factor of ten lower than industry stan-
dards like the 709 Yet they are a direct plug-in replace-
ment for the 709 LM101A and 741
The LM107 series offers the features of the LM101A which
makes its application nearly foolproof In addition the de-
vice provides better accuracy and lower noise in high im-
pedance circuitry The low input currents also make it partic-
ularly well suited for long interval integrators or timers sam-
ple and hold circuits and low frequency waveform genera-
tors Further replacing circuits where matched transistor
pairs buffer the inputs of conventional IC op amps it can
give lower offset voltage and drift at a lower cost
The LM107 is guaranteed over a b55 C to a125 C temper-
ature range the LM207 from b25 C to a85 C and the
LM307 from 0 C to a70 C
Features
Y _{Offset voltage 3 mV maximum over temperature}
Y _{Input current 100 nA maximum over temperature}
Y _{Offset current 20 nA maximum over temperature}
Y _{Guaranteed drift characteristics}
Connection Diagrams
Metal Can Package
Dual-in-Line Package
Note Pin 4 connected to case
Top View
Order Number LM107H 883
See NS Package Number H08C
TL H 7757 – 2
Dual-in-Line Package
Top View
TL H 7757 – 3
Order Number LM107J 883 or LM207J
See NS Package Number J08A
Order Number LM307N
See NS Package Number N08A
TL H 7757 – 13
Order Number LM107J-14 883
See NS Package Number J14A
Available per SMD 5962-8958901
C1995 National Semiconductor Corporation TL H 7757
RRD-B30M115 Printed in U S A