DS75160A Datasheet, PDF (1/10 Pages) National Semiconductor (TI) – IEEE-488 GPIB Transceivers

May 1999
DS75160A/DS75161A
IEEE-488 GPIB Transceivers
General Description
This family of high-speed-Schottky 8-channel bi-directional
transceivers is designed to interface TTL/MOS logic to the
IEEE Standard 488-1978 General Purpose Interface Bus
(GPIB). PNP inputs are used at all driver inputs for minimum
loading, and hysteresis is provided at all receiver inputs for
added noise margin. The IEEE-488 required bus termination
is provided internally with an active turn-off feature which dis-
connects the termination from the bus when V_CC is removed.
The General Purpose Interface Bus is comprised of 16 sig-
nal lines — 8 for data and 8 for interface management. The
data lines are always implemented with DS75160A, and the
management lines are either implemented with DS75161A in
a single-controller system.
Features
n 8-channel bi-directional non-inverting transceivers
n Bi-directional control implemented with TRI-STATE^®
output design
n Meets IEEE Standard 488-1978
n High-speed Schottky design
n Low power consumption
n High impedance PNP inputs (drivers)
n 500 mV (typ) input hysteresis (receivers)
n On-chip bus terminators
n No bus loading when V_CC is removed
n Pin selectable open collector mode on DS75160A driver
outputs
n Accommodates multi-controller systems
Connection Diagrams
Dual-In-Line Package
Dual-In-Line Package
DS005804-16
Order Number DS75161AN or DS75161AWM
See NS Package Number M20B or N20B
DS005804-1
Top View
Order Number DS75160AN or DS75160AWM
See NS Package Number M20B or N20A
TRI-STATE^® is a registered trademark of National Semiconductor Corporation.
© 1999 National Semiconductor Corporation DS005804
www.national.com