DS36C200I Datasheet, PDF (1/11 Pages) National Semiconductor (TI) – Dual High Speed Bi-Directional Differential Transceiver

February 2005
DS36C200I
Dual High Speed Bi-Directional Differential Transceiver
General Description
The DS36C200I is a dual transceiver device optimized for
high data rate and low power applications. This device pro-
vides a single chip solution for a dual high speed bi-
directional interface. Also, both control pins may be routed
together for single bit control of datastreams. Both control
pins are adjacent to each other for ease of routing them
together. The DS36C200I is compatible with IEEE 1394
physical layer and may be used as an economical solution
with some considerations. Please reference the application
information on 1394 for more information. The device is in a
14-lead small outline package. The differential driver outputs
provides low EMI with its low output swings typically 210 mV.
The receiver offers ±100 mV threshold sensitivity, in addition
to common-mode noise protection.
Features
n Industrial Temperature Range -40˚C to +85˚C
n Optimized for DSS to DVHS interface link
n Compatible IEEE 1394 signaling voltage levels
n Operates above 100 Mbps
n Bi-directional transceivers
n 14-lead SOIC and TSSOP packages
n Ultra low power dissipation
n ±100 mV receiver sensitivity
n Low differential output swing typical 210 mV
n High impedance during power off
Connection Diagrams
Note: * denotes active LOW pin
Order Number DS36C200IMA
See NS Package Number M14A
20077615
Note: * denotes active LOW pin
Order Number DS36C200IMT
See NS Package Number MTC14
20077616
© 2005 National Semiconductor Corporation DS200776
www.national.com