DS36C200 Datasheet, PDF (1/10 Pages) National Semiconductor (TI) – Dual High Speed Bi-Directional Differential Transceiver

June 1998
DS36C200
Dual High Speed Bi-Directional Differential Transceiver
General Description
The DS36C200 is a dual transceiver device optimized for
high data rate and low power applications. This device pro-
vides a single chip solution for a dual high speed
bi-directional interface. Also, both control pins may be routed
together for single bit control of datastreams. Both control
pins are adjacent to each other for ease of routing them to-
gether. The DS36C200 is compatible with IEEE 1394 physi-
cal layer and may be used as an economical solution with
some considerations. Please reference the application infor-
mation on 1394 for more information. The device is in a
14-lead small outline package. The differential driver outputs
provides low EMI with its low output swings typically 210 mV.
The receiver offers ±100 mV threshold sensitivity, in addition
to common-mode noise protection.
Features
n Optimized for DSS to DVHS interface link
n Compatible IEEE 1394 signaling voltage levels
n Operates above 100 Mbps
n Bi-directional transceivers
n 14-lead SOIC package
n Ultra low power dissipation
n ±100 mV receiver sensitivity
n Low differential output swing typical 210 mV
n High impedance during power off
Connection Diagram
Functional Diagram
DS012621-1
Note: * denotes active LOW pin
Order Number DS36C200M
See NS Package Number M14A
DS012621-2
TRI-STATE^® is a registered trademark of National Semiconductor Corporation.
© 1998 National Semiconductor Corporation DS012621
www.national.com