DS26C32AT Datasheet, PDF (1/11 Pages) National Semiconductor (TI) – Quad Differential Line Receiver

June 1998
DS26C32AT/DS26C32AM
Quad Differential Line Receiver
General Description
The DS26C32A is a quad differential line receiver designed
to meet the RS-422, RS-423, and Federal Standards 1020
and 1030 for balanced and unbalanced digital data transmis-
sion, while retaining the low power characteristics of CMOS.
The DS26C32A has an input sensitivity of 200 mV over the
common mode input voltage range of ±7V. The DS26C32A
features internal pull-up and pull-down resistors which pre-
vent output oscillation on unused channels.
The DS26C32A provides an enable and disable function
common to all four receivers, and features TRI-STATE ^®
outputs with 6 mA source and sink capability. This product is
pin compatible with the DS26LS32A and the AM26LS32.
Features
n CMOS design for low power
n ±0.2V sensitivity over input common mode voltage
range
n Typical propagation delays: 19 ns
n Typical input hysteresis: 60 mV
n Inputs won’t load line when V_CC = 0V
n Meets the requirements of EIA standard RS-422
n TRI-STATE outputs for connection to system buses
n Available in Surface Mount
n Mil-Std-883C compliant
Logic Diagram
Connection Diagrams
Dual-In-Line Package
00876401
20-Lead Ceramic Leadless Chip Carrier
00876402
Top View
Order Number DS26C32ATM or DS26C32ATN
See NS Package M16A or N16E
For Complete Military Product Specifications,
refer to the appropriate SMD or MDS.
Order Number DS26C32AME/883, DS26C32AMJ/883 or
DS26C32AMW/883
See NS Package E20A, J16A or W16A
TRI-STATE^® is a registered trademark of National Semiconductor Corporation.
© 2004 National Semiconductor Corporation DS008764
00876412
www.national.com