|
DS25MB100 Datasheet, PDF (1/16 Pages) National Semiconductor (TI) – 2.5 Gb/s 1:2 Mux/Buffer with Input Equalization and Output De-Emphasis | |||
|
March 2007
DS25MB100
2.5 Gb/s 1:2 Mux/Buffer with Input Equalization and Output
De-Emphasis
General Description
The DS25MB100 is a signal conditioning 2:1 multiplexer and
1:2 fan-out buffer designed for use in backplane redundancy
or cable driving applications. Signal conditioning features in-
clude input equalization and programmable output de-em-
phasis that enable data communication in FR4 backplane up
to 2.5 Gbps. Each input stage has a fixed equalizer to reduce
ISI distortion from board traces. All output drivers have four
selectable levels of de-emphasis to compensate for trans-
mission losses from long FR4 backplane or cable attenuation
reducing deterministic jitter. The de-emphasis levels can be
independently controlled for the line-side and switch-side
drivers. The internal loopback paths from switch-side input to
switch-side output enable at-speed system testing. All receiv-
er inputs and driver outputs are internally terminated with
100⦠differential terminating resistors.
Features
â 2:1 multiplexer and 1:2 buffer
â 0.25â2.5 Gbps fully differential data paths
â Fixed input equalization
â Programmable output de-emphasis
â Independent de-emphasis controls
â Programmable loopback modes
â On-chip terminations
â HBM ESD rating 5.5 kV on all pins
â +3.3V supply
â Low power, 0.45 W typical
â Lead-less LLP-36 package
â â40°C to +85°C operating temperature range
Applications
â Backplane driver or cable driver
â Redundancy and signal conditioning applications
â PCI Express
â Serial ATA
â CPRI/OBSAI
Functional Block Diagram
© 2007 National Semiconductor Corporation 202089
20208901
www.national.com
|
▷ |