|
DS10CP152Q_09 Datasheet, PDF (1/12 Pages) National Semiconductor (TI) – Automotive 1.5 Gbps 2X2 LVDS Crosspoint Switch | |||
|
DS10CP152Q
March 5, 2009
Automotive 1.5 Gbps 2X2 LVDS Crosspoint Switch
General Description
The DS10CP152Q is a 1.5 Gbps 2x2 LVDS crosspoint switch
optimized for high-speed signal routing and switching over
lossy FR-4 printed circuit board backplanes and balanced ca-
bles. Fully differential signal paths ensure exceptional signal
integrity and noise immunity. The non-blocking architecture
allows connections of any input to any output or outputs.
Wide input common mode range allows the switch to accept
signals with LVDS, CML and LVPECL levels; the output levels
are LVDS. A very small package footprint requires a minimal
space on the board while the flow-through pinout allows easy
board layout. Each differential input and output is internally
terminated with a 100⦠resistor to lower device return losses,
reduce component count and further minimize board space.
Features
â AECQ-100 Grade 3
â DC - 1.5 Gbps low jitter, low skew, low power operation
â Pin configurable, fully differential, non-blocking
architecture
â Wide Input Common Mode Voltage Range allows DC-
coupled interface to LVDS, CML and LVPECL drivers
â On-chip 100⦠input and output termination minimizes
insertion and return losses, reduces component count and
minimizes board space
â 8 kV ESD on LVDS I/O pins protects adjoining
components
â Small SOIC-16 space saving package
Applications
â Automotive display applications
â Clock and data buffering and muxing
â SD/HD SDI Routers
Typical Application
© 2009 National Semiconductor Corporation 300637
30063770
www.national.com
|
▷ |