DS10BR150_0711 Datasheet, PDF (1/12 Pages) National Semiconductor (TI) – 1.0 Gbps LVDS Buffer/Repeater

November 8, 2007
DS10BR150
1.0 Gbps LVDS Buffer / Repeater
General Description
The DS10BR150 is a single channel 1.0 Gbps LVDS buffer
optimized for high-speed signal transmission over lossy FR-4
printed circuit board backplanes and balanced cables. Fully
differential signal paths ensure exceptional signal integrity
and noise immunity.
Wide input common mode range allows the receiver to accept
signals with LVDS, CML and LVPECL levels; the output levels
are LVDS. A very small package footprint requires a minimal
space on the board while the flow-through pinout allows easy
board layout. The differential inputs and outputs are internally
terminated with a 100Ω resistor to lower device input and out-
put return losses, reduce component count and further mini-
mize board space.
Features
■ ^{DC - 1.0 Gbps low jitter, high noise immunity, low power}
operation
■ ^{On-chip 100Ω input and output termination minimizes}
insertion and return losses, reduces component count and
minimizes board space
■ ^{7 kV ESD on LVDS I/O pins protects adjoining}
components
■ ^{Small 3 mm x 3 mm 8-LLP space saving package}
Applications
■ ^{Clock and data buffering}
■ ^{OC-12 / STM-4}
■ ^{FireWire 800}
Typical Application
© 2007 National Semiconductor Corporation 300017
30001710
www.national.com