English
Language : 

DP83848M Datasheet, PDF (1/72 Pages) National Semiconductor (TI) – PHYTER® Mini / PHYTER® Mini LS Commercial Temperature Single Port 10/100 Ethernet Tran
October 2006
DP83848M PHYTER® Mini
DP83848J PHYTER® Mini LS
Commercial Temperature Single Port 10/100 Ethernet Transceiver
General Description
Features
The DP83848M/J addresses the quality, reliability and •
small form factor required for space sensitive applications •
in embedded systems.
•
The DP83848M/J offers performance far exceeding the
IEEE specifications, with superior interoperability and
•
industry leading performance beyond 137m of Cat-V •
cable. The DP83848M/J also offers Auto-MDIX to remove •
cabling complications. DP83848M/J has superior ESD
pro-tection, greater than 4KV Human Body Model, provid-
•
ing extremely high reliability and robust operation, ensur- •
ing a high level performance in all applications.
•
Low-power 3.3V, 0.18µm CMOS technology
3.3V MAC Interface
Auto-MDIX for 10/100 Mb/s
Energy Detection Mode
MII Interface
MII serial management interface (MDC and MDIO)
IEEE 802.3u Auto-Negotiation and Parallel Detection
IEEE 802.3u ENDEC, 10BASE-T transceivers and filters
IEEE 802.3u PCS, 100BASE-TX transceivers and filters
DP83848J offers two flexible LED indicators - one for Link •
and the other for Speed.
A 25MHz clock out that eliminates the need and hence the
space and cost, of an additional Media Access Control •
(MAC) clock
DP83848M.
source
component
is
available
only
in
•
•
The DP83848M/J is offered in a tiny 6mm x 6mm LLP 40-
pin package and is ideal for industrial controls, build- •
ing/factory automation, transportation, test equipment and •
wireless base stations.
Integrated ANSI X3.263 compliant TP-PMD physical su-
blayer with adaptive equalization and Baseline Wander
compensation
Error-free Operation beyond 137 meters
ESD protection - greater than 4KV Human body model
LED support for Link in DP83848M
LED support for Link and Speed in DP83848J
Supports system clock from oscillator (Not available in
DP83848J)
Applications
• Single register access for complete PHY status
• 10/100 Mb/s packet BIST (Built in Self Test)
• Peripheral devices
• 40 pin LLP package (6mm) x (6mm) x (0.8mm)
• Mobile devices
• Factory and building automation
• Basestations
System Diagram
MPU/CPU
MII
PHYTER Mini
PHYTER Mini LS
10/100 Ethernet
Transceiver
10BASE-T
or
100BASE-TX
Clock
Source
Status
LED/s
Typical Ethernet Application
PHYTER® and TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 2006 National Semiconductor Corporation
www.national.com