CRIO-907X Datasheet, PDF (1/2 Pages) National Instruments Corporation – Lower cost systems for high-volume OEM applications

CompactRIO Integrated Systems with Real-Time Controller
and Reconfigurable Chassis
NI cRIO-907x NEW!
• Integrated CompactRIO systems with
a reconfigurable FPGA chassis and
embedded real-time controller
• Lower cost systems for high-volume
OEM applications
• Up to 2M gate reconfigurable FPGA
• 8 slots for C Series I/O modules
• Up to 400 MHz real-time processor
• Up to 128 MB DRAM memory, 256 MB
of nonvolatile storage
• Up to two 10/100BaseTX Ethernet ports
with built-in FTP/HTTP servers and
LabVIEW remote panel Web server
• RS232 serial port for peripheral devices
• Low power consumption with single
19 to 30 VDC power supply inputs
• -20 to 55 °C operating
temperature range
LabVIEW Development Software
• LabVIEW Real-Time (VxWorks)
• LabVIEW FPGA
Driver Software
• NI-RIO for reconfigurable
embedded systems
>> For complete specifications, see the CompactRIO cRIO-9072/9074
Operating Instructions manual at ni.com/manuals.
Product Processor Speed FPGA Size
(MHz)
(Gates)
cRIO-9072
266
1M
cRIO-9074
400
2M
Table 1. cRIO-907x Selection Guide
Module
Slots
8
8
DRAM Memory
(MB)
64
128
Internal Nonvolatile
Storage (MB)
128
256
10/100BaseTX
Ethernet Port

 (Dual)
RS232
Serial Port


Power Supply
Input Range
19 to 30 VDC
19 to 30 VDC
Remote Panel
Web and FTP Servers


Overview and Applications
National Instruments cRIO-907x integrated systems combine an
industrial real-time controller and reconfigurable FPGA chassis for
high-volume and industrial machine control and monitoring applications.
The new NI cRIO-9072 integrated system features an industrial
266 MHz real-time processor and an 8-slot chassis with an embedded,
reconfigurable 1M gate FPGA chip. The new NI cRIO-9074 integrated
system contains a 400 MHz real-time processor and an 8-slot chassis
with an embedded, reconfigurable 2M gate FPGA chip. Both systems
feature built-in nonvolatile memory and a fault-tolerant file system that
deliver increased reliability for data-logging applications.
Both systems also accept up to eight NI C Series I/O modules.
A variety of I/O modules are available including voltage, current,
thermocouple, RTD, accelerometer, and strain gage inputs; up to ±60 V
simultaneous sampling analog I/O; 12, 24, and 48 V industrial digital I/O;
5 V/TTL digital I/O; counter/timers; pulse generation; and high
voltage/current relays.
The 10/100 Mb/s Ethernet port allows for programmatic
communication over the network and built-in Web (HTTP) and file (FTP)
servers. The cRIO-9074 features dual Ethernet ports, which allows for
the use of one port for network communication to a host PC or enterprise
system and the other port for expansion I/O (easily connect another
CompactRIO system or another Ethernet-based device for additional I/O).
Embedded Software
You can quickly program the reconfigurable FPGA within the cRIO-907x
systems using the NI LabVIEW FPGA Module for custom and high-speed
control, I/O timing, and signal processing. The LabVIEW Real-Time
Module includes built-in function blocks for floating-point control,
processing, analysis, data logging, and communication for programming the
embedded real-time processor. LabVIEW Real-Time also has function blocks
to program data transfer between the real-time processor and the FPGA.
Ordering Information
NI cRIO-9072 ........................................................................779998-01
NI cRIO-9074 ........................................................................779999-01
OEM Pricing Available!
Aggressive discounts are available for high-volume customers.
BUY NOW!
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S.) or go to ni.com/compactrio.