CLC5602 Datasheet, PDF (1/12 Pages) National Semiconductor (TI) – Dual, High Output, Video Amplifier

N
CLC5602
Dual, High Output, Video Amplifier
June 1999
General Description
The National CLC5602 has a new output stage that delivers high
output drive current (130mA), but consumes minimal
quiescent supply current (1.5mA/ch) from a single 5V supply. Its
current feedback architecture, fabricated in an advanced comple-
mentary bipolar process, maintains consistent performance over
a wide range of gains and signal levels, and has a linear-phase
response up to one half of the -3dB frequency.
The CLC5602 offers 0.1dB gain flatness to 22MHz and differen-
tial gain and phase errors of 0.06% and 0.02°. These features are
ideal for professional and consumer video applications.
The CLC5602 offers superior dynamic performance with a
135MHz small-signal bandwidth, 300V/µs slew rate and 5.7ns
rise/fall times (2V_step). The combination of low quiescent power,
high output current drive, and high-speed performance make
the CLC5602 well suited for many battery-powered personal
communication/computing systems.
The ability to drive low-impedance, highly capacitive loads,
makes the CLC5602 ideal for single ended cable applications.
It also drives low impedance loads with minimum distortion.
The CLC5602 will drive a 100Ω load with only -86/-85dBc
second/third harmonic distortion (A_v = +2, V_out = 2V_pp, f = 1MHz).
With a 25Ω load, and the same conditions, it produces only -86/
-72dBc second/third harmonic distortion.
The CLC5602 can also be used for driving differential-input step-
up transformers for applications such as Asynchronous Digital
Subscriber Lines (ADSL) or High-Bit-Rate Digital Subscriber
Lines (HDSL).
When driving the input of high-resolution A/D converters, the
CLC5602 provides excellent -87/-95dBc second/third harmonic
distortion (A_v = +2, V_out = 2V_pp, f = 1MHz, R_L = 1kΩ) and fast
settling time.
Features
s 130mA output current
s 0.06%, 0.02° differential gain, phase
s 1.5mA/ch supply current
s 135MHz bandwidth (A_v = +2)
s -87/-95dBc HD2/HD3 (1MHz)
s 15ns settling to 0.05%
s 300V/µs slew rate
s Stable for capacitive loads up to 1000pf
s Single 5V or ±5V supplies
Applications
s Video line driver
s ADSL/HDSL driver
s Coaxial cable driver
s UTP differential line driver
s Transformer/coil driver
s High capacitive load driver
s Portable/battery-powered applications
s Differential A/D driver
Maximum Output Voltage vs. RL
10
9
8
7
VCC = ±5V
6
5
4
3
Vs = +5V
2
1
10
100
1000
RL (Ω)
Typical Application
Differential Line Driver with Load Impedance Conversion
Rg2
Vin
Rt1
Vd/2
+
1/2
CLC5602
-
Rf1
Rg1
Rt2
Rf2
-
1/2
Rm/2
-Vd/2
1:n
CLC5602
Req
+
Rm/2
Zo
UTP
Io
+
RL V_o
-
V_o1
V_inv1
V_non-inv1
-V_CC
Pinout
DIP & SOIC
+V_CC
V_o2
V_inv2
V_non-inv2
© 1999 National Semiconductor Corporation
Printed in the U.S.A.
http://www.national.com