CLC532_01 Datasheet, PDF (1/15 Pages) National Semiconductor (TI) – High Speed 2:1 Analog Multiplexer

December 2001
CLC532
High Speed 2:1 Analog Multiplexer
General Description
The CLC532 is a high speed 2:1 multiplexer with active input
and output stages. The CLC532 innovative design employs
a closed loop design which dramatically improves accuracy.
This monolithic device is constructed using an advanced
high performance bipolar process.
The CLC532 has been specifically designed to provide set-
tling times of 17ns to 0.01%. Fast settling time, coupled with
the adjustable bandwidth, and channel-to-channel isolation
is better than 80dB @10MHz. Low distortion (−80dBc) makes
the CLC532 an ideal choice for infrared and CCD imaging
systems and spurious signal levels make the CLC532 a very
suitable choice for both I/Q processors and receivers.
The CLC532 is offered in two industrial versions,
CLC532AJP\AJE, specified from −40˚C to +85˚C and pack-
aged in 14-pin plastic DIP14-pin and SOIC packages.
Enhanced Solutions (Military/Aerospace)
SMD Number: 5962-92035
*Space level versions also available.
*For more information, visit http://www.national.com/mil
n Adjustable bandwidth–190MHz(max)
Applications
n Infrared system multiplexing
n CCD sensor signals
n Radar I/Q switching
n High definition video HDTV
n Test and calibration
Settling Time vs. R_L
Features
n 17ns 12-bit settling time to .01%
n Low noise – 32µVrms
n High isolation – 80dB @ 10MHz
n Low distortion – 80dBc @ 5MHz
DS012716-24
Typical Application
Connection Diagram
DS012716-2
Ordering Information
Package
14-Pin Plastic DIP
14-Pin Plastic SOIC
Temperature Range
Industrial
−40˚C to +85˚C
−40˚C to +85˚C
Part Number
CLC532AJP
CLC532AJE
© 2001 National Semiconductor Corporation DS012716
DS012716-4
Pinout
DIP & SOIC
Package Marking
CLC532AJP
CLC532AJE
NSC Drawing
N14E
M14A
www.national.com