CLC416 Datasheet, PDF (1/6 Pages) National Semiconductor (TI) – Dual Low-Power, 120MHz Op Amp

N
CLC416
Dual Low-Power, 120MHz Op Amp
September 1998
General Description
The CLC416 is a dual, wideband (120MHz) op amp. The
CLC416 consumes only 39mW per channel and can source or
sink an output current of 60mA. These features make the
CLC416 a versatile, high-speed solution for demanding
applications that are sensitive to both power and cost.
Utilizing National’s proven architectures, this dual current
feedback amplifier surpasses the performance of alternative
solutions and sets new standards for low power. This power-
conserving dual op amp achieves low distortion with -80dBc and
-80dBc second and third harmonics respectively. Many high
source impedance applications will benefit from the CLC416’s
6MΩ input impedance. And finally, designers will have a bipolar
part with an exceptionally low 100nA non-inverting bias current.
With 0.1dB flatness to 30MHz and low differential gain and phase
errors, the CLC416 is an ideal part for professional video
processing and distribution. The 120MHz -3dB bandwidth (A_v =
+2) coupled with a 400V/µs slew rate also makes the CLC416
a perfect choice in cost-sensitive applications such as video
monitors, fax machines, copiers, and CATV systems.
Features
s 0.01%, 0.03° D_G, Dφ
s Very low input bias current: 100nA
s High input impedance: 6MΩ
s 120MHz -3dB bandwidth (A_v = +2)
s Low power
s High output current: 60mA
s Low-cost
Applications
s Desktop video systems
s Video distribution
s Flash A/D driver
s High-speed driver
s High-source impedance applications
s Professional video processing
s High resolution monitors
Frequency Response (Av = +2V/V)
V1
348Ω
V2
Typical Application Diagram
Instrumentation Amplifier
+
1/2
CLC416
-
348Ω
348Ω
-
1/2
CLC416
+
348Ω
348Ω
348Ω
-
CLC405
+
R1
348Ω
Vout = 3(V2 - V1)
© 1998 National Semiconductor Corporation
Printed in the U.S.A.
Pinout
DIP & SOIC
Vo1
Vinv1
Vnon-inv1
-VCC
+VCC
Vo2
Vinv2
Vnon-inv2
http://www.national.com