|
CLC007_07 Datasheet, PDF (1/10 Pages) National Semiconductor (TI) – Serial Digital Cable Driver with Dual Complementary | |||
|
October 2007
CLC007
Serial Digital Cable Driver with Dual Complementary
Outputs
General Description
Nationalâs Comlinear CLC007 is a monolithic, high-speed ca-
ble driver designed for the SMPTE 259M serial digital video
data transmission standard. The CLC007 drives 75⦠trans-
mission lines (Belden 8281 or equivalent) at data rates up to
400 Mbps. Controlled output rise and fall times (750 ps typi-
cal) minimize transition-induced jitter. The output voltage
swing, typically 1.65V, set by an accurate, low-drift internal
bandgap reference, delivers an 800 mV swing to back-
matched and terminated 75⦠cable.
The CLC007âs class AB output stage consumes less power
than other designs, 195 mW with all outputs terminated, and
requires no external bias resistors. The differential inputs ac-
cept a wide range of digital signals from 200 mVP-P to ECL
levels within the specified common-mode limits. All this make
the CLC007 an excellent general purpose high speed driver
for digital applications.
The CLC007 is powered from a single +5V or â5.2V supply
and comes in an 8-pin SOIC package.
Applications
â Digital routers and distribution amplifiers
â Coaxial cable driver for digital transmission line
â Twisted pair driver
â Digital distribution amplifiers
â SMPTE, Sonet/SDH, and ATM compatible driver
â Buffer applications
270 Mbps Eye Pattern
Key Specifications
â 650 ps rise and fall times
â Data rates to 400 Mbps
â 2 sets of complimentary outputs
â 200 mV differential input
â Low residual jitter (25 pspp)
Features
â No external pull-down resistors
â Differential input and output
â Low power dissipation
â Single +5V or â5.2V supply
â Replaces GS9007 in most applications
10008501
Connection Diagram (8-Pin SOIC)
10008503
Order Number CLC007BM
See NS Package Number M08A
© 2007 National Semiconductor Corporation 100085
www.national.com
|
▷ |