54ACTQ16245 Datasheet, PDF (1/6 Pages) National Semiconductor (TI) – 16-Bit Transceiver with TRI-STATE Outputs

September 1998
54ACTQ16245
16-Bit Transceiver with TRI-STATE^® Outputs
General Description
The ’ACTQ16245 contains sixteen non-inverting bidirec-
tional buffers with TRI-STATE outputs and is intended for
bus oriented applications. The device is byte controlled.
Each has separate control inputs which can be shorted to-
gether for full 16-bit operation. The T/R inputs determine the
direction of data flow through the device. The OE inputs dis-
able both the A and B ports by placing them in a high imped-
ance state.
The ’ACTQ16245 utilizes NSC Quiet Series technology to
guarantee quiet output switching and improved dynamic
threshold performance. FACT Quiet Series^® features GTO^®
output control for superior performance.
Features
n Utilizes NSC FACT Quiet Series technology
n Guaranteed simultaneous switching noise level and
dynamic threshold performance
n Bidirectional non-inverting buffers
n Separate control logic for each byte
n 16-bit version of the ’ACTQ245
n Outputs source/sink 24 mA
n Standard Microcircuit Drawing (SMD) 5962-9562001
Logic Symbol
Connection Diagram
Pin Assignment for CERPAK
DS010926-1
Pin Description
Pin Names
OE_n
T/R
A₀– A₁₅
B₀– B₁₅
Description
Output Enable Input (Active Low)
Transmit/Receive Input
Side A Inputs/Outputs
Side B Outputs/Inputs
GTO™ is a trademark of National Semiconductor Corporation.
TRI-STATE^® is a registered trademark of National Semiconductor Corporation.
FACT™ and FACT Quiet Series™ are trademarks of Fairchild Semiconductor Corporation.
© 1998 National Semiconductor Corporation DS010926
DS010926-2
www.national.com