54ACQ374 Datasheet, PDF (1/8 Pages) National Semiconductor (TI) – Quiet Series Octal D Flip-Flop with TRI-STATE Outputs

August 1998
54ACQ374 • 54ACTQ374
Quiet Series Octal D Flip-Flop with TRI-STATE^® Outputs
General Description
The ’ACQ/’ACTQ374 is a high-speed, low-power octal
D-type flip-flop featuring separate D-type inputs for each
flip-flop and TRI-STATE outputs for bus-oriented applica-
tions. A buffered Clock (CP) and Output Enable (OE) are
common to all flip-flops.
The ’ACQ/’ACTQ374 utilizes Quiet Series technology to
guarantee quiet output switching and improve dynamic
threshold performance. FACT Quiet Series™ features
GTO™ output control and undershoot corrector in addition to
a split ground bus for superior performance.
Features
n I_CC and I_OZ reduced by 50%
n Guaranteed simultaneous switching noise level and
dynamic threshold performance
n Improved latch-up immunity
n Buffered positive edge-triggered clock
n TRI-STATE outputs drive bus lines or buffer memory
address registers
n Outputs source/sink 24 mA
n Faster prop delays than the standard ’AC/’ACT374
n 4 kV minimum ESD immunity
n Standard Military Drawing (SMD)
— ’ACTQ374: 5962-92189
— ’ACQ374: 5962-92179
Logic Symbols
Connection Diagrams
Pin Assignment for DIP
and Flatpak
IEEE/IEC
DS100239-1
DS100239-3
Pin Assignment for LCC
DS100239-2
GTO™ is a trademark of National Semiconductor Corporation.
TRI-STATE^® is a registered trademark of National Semiconductor Corporation.
FACT^® is a registered trademark of Fairchild Semiconductor Corporation.
FACT Quiet Series™ is a trademark of Fairchild Semiconductor Corporation.
© 1998 National Semiconductor Corporation DS100239
DS100239-4
www.national.com