54ABT273 Datasheet, PDF (1/8 Pages) National Semiconductor (TI) – Octal D-Type Flip-Flop

July 1998
54ABT273
Octal D-Type Flip-Flop
General Description
The ’ABT273 has eight edge-triggered D-type flip-flops with
individual D inputs and Q outputs. The common buffered
Clock (CP) and Master Reset (MR) inputs load and reset
(clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each D in-
put, one setup time before the LOW-to-HIGH clock transi-
tion, is transferred to the corresponding flip-flop’s Q output.
All outputs will be forced LOW independently of Clock or
Data inputs by a LOW voltage level on the MR input. The de-
vice is useful for applications where the true output only is re-
quired and the Clock and Master Reset are common to all
storage elements.
Features
n Eight edge-triggered D flip-flops
n Buffered common clock
n Buffered, asynchronous Master Reset
n See ’ABT377 for clock enable version
n See ’ABT373 for transparent latch version
n See ’ABT374 for TRI-STATE^® version
n Output sink capability of 48 mA, source capability of
24 mA
n Guaranteed latchup protection
n High impedance glitch free bus loading during entire
power up and power down cycle
n Non-destructive hot insertion capability
n Disable time less than enable time to avoid bus
contention
n Standard Microcircuit Drawing (SMD) 5962-9321701
Ordering Code
Military
54ABT273J-QML
54ABT273W-QML
54ABT273E-QML
Package
Number
J20A
W20A
E20A
Package Description
20-Lead Ceramic Dual-In-Line
20-Lead Cerpack
20-Lead Ceramic Leadless Chip Carrier, Type C
TRI-STATE^® is a registered trademark of National Semiconductor Corporation.
© 1998 National Semiconductor Corporation DS100205
www.national.com