100325 Datasheet, PDF (1/8 Pages) National Semiconductor (TI) – Low Power Hex ECL-to-TTL Translator

August 1998
100325
Low Power Hex ECL-to-TTL Translator
General Description
The 100325 is a hex translator for converting F100K logic
levels to TTL logic levels. Differential inputs allow each circuit
to be used as an inverting, non-inverting or differential re-
ceiver. An internal reference voltage generator provides V_BB
for single-ended operation, or for use in Schmitt trigger appli-
cations. All inputs have 50 kΩ pull-down resistors. When the
inputs are either unconnected or at the same potential the
outputs will go low.
When used in single-ended operation the apparent input
threshold of the true inputs is 20 mV to 40 mV higher (posi-
tive) than the threshold of the complementary inputs. The
V_EE and V_TTL power may be applied in either order.
Features
n Pin/function compatible with 100125
n Meets 100125 AC specifications
n 50% power reduction of the 100125
n Differential inputs with built in offset
n Standard FAST^® outputs
n 2000V ESD protection
n −4.2V to −5.7V operating range
n Available to Microcircuit Drawing
(SMD) 5962-9153101
Logic Diagram
Pin Names
D₀– D₅
D₀– D₅
Q₀– Q₅
Description
Data Inputs
Inverting Data Inputs
Data Outputs
DS100314-4
FAST^® is a registered trademark of Fairchild Semiconductor.
© 1998 National Semiconductor Corporation DS100314
www.national.com