5041 Datasheet, PDF (6/11 Pages) Nippon Precision Circuits Inc – High-stability Crystal Oscillator IC with Frequency Adjustment Function

5041 series
DC Characteristics (5041B1A to B6A)
V_DD = 1.60V to 2.25V, V_SS = 0V, Ta = −40°C to +85°C, C_LOUT = 15pF unless otherwise noted.
Parameter
Symbol
Conditions
Rating
Unit
MIN
TYP
MAX
Operating-mode current
consumption^*1
Standby-mode current
consumption
5041B1A (f_OUT = fo), Measurement circuit 1,
no load, INHN = HIGH, fo = 48MHz, V_DD = 1.8V
–
5041B2A (f_OUT = fo/2), Measurement circuit 1,
no load, INHN = HIGH, fo = 48MHz, V_DD = 1.8V
–
5041B3A (f_OUT = fo/4), Measurement circuit 1,
no load, INHN = HIGH, fo = 48MHz, V_DD = 1.8V
–
I_DD
5041B4A (f_OUT = fo/8), Measurement circuit 1,
no load, INHN = HIGH, fo = 48MHz, V_DD = 1.8V
–
5041B5A (f_OUT = fo/16), Measurement circuit 1,
no load, INHN = HIGH, fo = 48MHz, V_DD = 1.8V
–
5041B6A (f_OUT = fo/32), Measurement circuit 1,
no load, INHN = HIGH, fo = 48MHz, V_DD = 1.8V
–
I_ST Measurement circuit 1, INHN = LOW
–
1.7
3.4
mA
1.5
3.3
mA
1.4
3.2
mA
1.4
3.1
mA
1.3
3.1
mA
1.3
3.0
mA
–
10
µA
HIGH-level output voltage
LOW-level output voltage
Output leakage current
HIGH-level input current
LOW-level input current
INHN pull-up resistance
V_OH Q pin, Measurement circuit 3, I_OH = −4mA
V_DD−0.4
–
V_OL Q pin, Measurement circuit 3, I_OL = 4mA
–
–
I_Z
Measurement circuit 4,
INHN = LOW
Q = V_DD
Q = V_SS
–
–
−10
–
V_IH
INHN pin, Measurement circuit 5
V_IL
0.7V_DD
–
–
–
R_PU1
Measurement circuit 6
R_PU2
INHN = V_SS
0.4
1.5
INHN = 0.7V_DD
50
100
–
V
0.4
V
10
µA
–
µA
–
V
0.3V_DD
V
10
MΩ
200
kΩ
*1. The consumption current I_DD (C_LOUT) with a load capacitance (C_LOUT) connected to the Q pin is given by the following equation, where I_DD is the no-
load consumption current and
I_DD (C_LOUT) [mA] = I_DD [mA] +
f_OUT is
C_LOUT
the output frequency.
[pF] × V_DD [V] × f_OUT
[MHz]
×
10^–3
SEIKO NPC CORPORATION—6