SM5301 Datasheet, PDF (4/12 Pages) Nippon Precision Circuits Inc – 3-channel Video Buffer with Built-in Wideband Filters

SM5301AS
SPECIFICATIONS
Absolute Maximum Ratings
Parameter
Symbol
Rating
Unit
Supply voltage range
V _CC
− 0.3 to 7.0
V
Storage temperature range
T _stg
− 55 to + 125
°C
Power dissipation 1¹
P_D1
1.0
W
Power dissipation 2²
P_D2
0.9
W
1. When mounted on a substrate: mounted on a 111 × 80 × 1.6mm glass-epoxy substrate with 90%
copper (Cu) wiring factor, 0m/s air flow, and Ta = – 25 to 70 °C.
2. When mounted on a substrate: mounted on a 111 × 80 × 1.6mm glass-epoxy substrate with 90%
copper (Cu) wiring factor, 0m/s air flow, and Ta = 70 to 80 °C.
Recommended Operating Conditions
Parameter
Symbol
Rating
Unit
Supply voltage ranges
V _CC
4.5 to 5.5
V
Operating temperature range
Ta
– 25 to 85
°C
Electrical Characteristics
V_CC = 4.5 to 5.5V, Ta = – 25 to 85°C unless otherwise noted.
Parameter
Symbol
Condition
min
Rating
typ
max
Unit
Test
level
Supply current 1
V_CC = 5.5V, RFC = 820Ω to GND,
I_CC1 VFC = 0.2V (fc = 5MHz),
70
DISABLE = "L"
100
130
mA
I
Supply current 2
V_CC = 5.5V, RFC = 820Ω to GND,
I_CC2 VFC = 1.6V (fc = 40MHz),
90
DISABLE = "L"
120
160
mA
I
Supply current 3
V_CC = 5.5V, RFC = 820Ω to GND,
I_CC3 VFC = 0.2V (fc = 40MHz),
1
2.5
5
mA
I
DISABLE = "H"
Output gain error 1
Output gain error 2
∆A_V1
Error entered around table 1 values,
Ta = 0 to 70°C, V_CC = 4.75 to 5.25V
– 0.5
–
+ 0.5
dB
I
∆A_V2
Error entered around table 1 values,
Ta = – 25 to 85°C
–1
–
+1
dB
I
Output voltage
V_out2 RL = 75Ω to GND, 6dB gain setting
2.4
–
–
Vp-p
I
DISABLE-mode input impedance
(pull-down)
R_IN1
R_INA/Y_INA, R_INB/Y_INB, G_INA/U_INA,
G_INB/U_INB, B_INA/V_INA, B_INB/V_INB
–
50
–
kΩ
I
Clamp response time
T _clamp
Time for 90% output signal change
for 10mV input signal, C_IN = 0.1µF
–
8
–
ms
II
Maximum input amplitude
V_I
AC coupling, 6dB gain setting
–
–
1.4
Vp-p
I
Maximum overshoot
V_OS 2Vp-p output pulse
–
10
–
%
II
Maximum load capacitance
C_L
B_OUT/V_OUT, G_OUT/U_OUT, R_OUT/Y_OUT
–
–
15
pF
II
Output drive load
RL one load unit = 150Ω
–
–
2
load
I
Channel-to-channel gain
difference
dG Between R/G/B, fc/2 [Hz]
–
–
0.5
dB
I
NIPPON PRECISION CIRCUITS INC.—4