SM8133B Datasheet, PDF (18/20 Pages) Nippon Precision Circuits Inc – White LED Driver IC

SM8133B
PERIPHERAL PARTS
About the External Capacitors
The best capacitors for use with the SM8133B are multi-layer ceramic capacitors. When selecting a multi-layer
ceramic capacitor, only X5R and X7R dielectric types are strongly recommended, since the loss of capacitance
in various conditions is less than other types such as Z5U and Y5V. The much loss of capacitance in various
conditions may cause the output voltage unstable.
Table. The EIA three digit "TC" code
Lower temperature limit High temperature limit
X = −55°C
Y = −30°C
Z = +10°C
5 = +85°C
6 = +105°C
7 = +125°C
8 = +150°C
Maximum allowable capacitance
change from + 25°C (0V DC)
F = ± 7.5%
P = ± 10%
R = ± 15%
S = ± 22%
T = +22%/−33%
U = +22%/−56%
V = +22%/−82%
For example
: X5R
About the Input Capacitor "C4"
The parts layout of PCB may merely cause the “V_OUT” output voltage unstable. In this case, increasing the
“C4” input capacitance value or adding another capacitor on the VIN input line is effective to solve the unsta-
ble output voltage.
QFN-20 Package
Package corner metals are not IC I/O pins. Don’t connect any lines to these corner metals.
Bottom view
NIPPON PRECISION CIRCUITS INC.—18