SM8172A Datasheet, PDF (17/17 Pages) Nippon Precision Circuits Inc – 2-output Power Supply IC

SM8172A
Please pay your attention to the following points at time of using the products shown in this document.
1. The products shown in this document (hereinafter ”Products”) are designed and manufactured to the generally
accepted standards of reliability as expected for use in general electronic and electrical equipment, such as
personal equipment, machine tools and measurement equipment. The Products are not designed and
manufactured to be used in any other special equipment requiring extremely high level of reliability and safety,
such as aerospace equipment, nuclear power control equipment, medical equipment, transportation equipment,
disaster prevention equipment, security equipment. The Products are not designed and manufactured to be used
for the apparatus that exerts harmful influence on the human lives due to the defects, failure or malfunction of the
Products.
If you wish to use the Products in that apparatus, please contact our sales section in advance.
In the event that the Products are used in such apparatus without our prior approval, we assume no responsibility
whatsoever for any damages resulting from the use of that apparatus.
2. NPC reserves the right to change the specifications of the Products in order to improve the characteristics or
reliability thereof.
3. The information described in this document is presented only as a guide for using the Products. No responsibility
is assumed by us for any infringements of patents or other rights of the third parties which may result from its use.
No license is granted by implication or otherwise under any patents or other rights of the third parties. Then, we
assume no responsibility whatsoever for any damages resulting from that infringements.
4. The constant of each circuit shown in this document is described as an example, and it is not guaranteed about its
value of the mass production products.
5. In the case of that the Products in this document falls under the foreign exchange and foreign trade control law or
other applicable laws and regulations, approval of the export to be based on those laws and regulations are
necessary. Customers are requested appropriately take steps to obtain required permissions or approvals from
appropriate government agencies.
SEIKO NPC CORPORATION
1-9-9, Hatchobori, Chuo-ku,
Tokyo 104-0032, Japan
Telephone: [phone]
Facsimile: [phone]
http://www.npc.co.jp/
Email:[e-mail]
NC0804AE 2009.09
SEIKO NPC CORPORATION —17