|
HHXC160ARA271MHA0G Datasheet, PDF (1/2 Pages) Nippon Precision Circuits Inc – Conductive Polymer Hybrid Aluminum Electrolytic Capacitors | |||
|
Engineering Bulletin Introductory
No.849C/May.2015
Conductive Polymer Hybrid
Aluminum Electrolytic Capacitors
HXCSeries
â High reliability and high voltage are realized by hybrid electrolyte
â Endurance with ripple current : 4,000 hours at 125â
â Rated voltage range : 16 to 35Vdc, Capacitance range : 150 to 470μF
â For high temperature and high reliability applications.
(Automotive equipment, Base station equipment, etc.)
â Halogen Free.
â SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Bias Humidity Test
Characteristics
-55 to +125â
16 to 35Vdc
±20%ï¼Mï¼
I=0.01CV
Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V)
Rated voltage (Vdc)
16V 25V 35V
tanδ(Max.)
0.16 0.14 0.12
(at 20â , 120Hz)
(at 20â after 2 minutes)
(at 20â , 120Hz)
Z(-25â ) / Z(+20â ) ⦠1.5
Z(-55â ) / Z(+20â ) ⦠2.0
(at 100kHz)
The following specifications shall be satisfied when the capacitors are restored to 20â after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125â .
Capacitance change ⦠±30ï¼
of the initial value
D.F. (tanδ)
ESR
Leakage current
⦠200ï¼
of the initial specified value
⦠200ï¼
of the initial specified value
⦠The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20â after exposing them for 1,000 hours at 125â without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ⦠±30ï¼
of the initial value
D.F. (tanδ)
⦠200ï¼
of the initial specified value
ESR
⦠200ï¼
of the initial specified value
Leakage current
⦠The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20â after subjecting them to the DC rated voltage at
85â , 85% RH for 2,000 hours.
Appearance
No significant damage
Capacitance change ⦠±30ï¼
of the initial value
D.F. (tanδ)
ESR
⦠200ï¼
of the initial specified value
⦠200ï¼
of the initial specified value
Leakage current
⦠The initial specified value
â DIMENSIONSãï¼»mmï¼½
âTerminal Code : A
Vent for JA0
âW
Size Code ÏD L A B C
W
P
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0
10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
â MARKING
EX) 35V150μF
26A
â 150 â
V HC
0.3max.
L±0.5
A±0.2
â
â PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
H HXC
A RA
M
G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 150μF:151, 470μF:471)
Taping code
Terminal code
Voltage code (ex. 16V:160,35V:350)
Series code
Category
âRated voltage symbol
Rated voltage (Vdc)
16
25
35
Symbol
C
E
V
Please contact us for mass production schedule.
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1755 1
|
▷ |