ESMG451ELL1R0MJC5S Datasheet, PDF (1/4 Pages) Nippon Precision Circuits Inc – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Downsized, 85C
@Endurance : 2,000 hours at 85C
@Solvent resistant type except 315 to 450Vdc
(see PRECAUTIONS AND GUIDELINES)
@RoHS Compliant
SMQ
Downsized
SMG
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +85C(6.3 to 400Vdc) -25 to +85C(450Vdc)}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
6.3 to 450Vdc
P20% (M)
(at 20C, 120Hz)
6.3 to 100Vdc
160 to 450Vdc
[F18
I=0.03CV or 4MA, whichever is greater.
CV ^{Time After 1minute}
CV[1,000 I=0.1CV+40 max.
After 5minutes
I=0.03CV+15 max.
CV>1,000 I=0.04CV+100 max.
I=0.02CV+25 max.
(at 20C after 1 minute)
(at 20C)
]F20
I=0.03CV
(at 20C after 3 minutes)
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V315 to 400V 450V
tanE (Max.)
[F18
]F20
0.34 0.24 0.20 0.16 0.14 0.12 0.09 0.08 0.20
0.28 0.24 0.20 0.16 0.14 0.12 0.09 0.08 0.15
0.24 0.24
0.15 0.20
When nominal capacitance exceeds 1,000MF, add 0.02 to the value above for each 1,000MF increase.
(at 20C, 120Hz)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V315 to 400V 450V
Z(-25C)/Z(+20C)
[F18
54322222
3
6
6
]F20
54322222
4
6
6
Z(-40C)/Z(+20C)
[F18
12 10 8 5 4 3 3 3
4
6
- (at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2,000 hours
at 85C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 85C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Rated voltage
6.3 to 100Vdc
160 to 450Vdc
Capacitance change [P20% of the initial value
[P20% of the initial value
D.F. (tanE)
[200% of the initial specified value [200% of the initial specified value
Leakage current
[The initial specified value
[500% of the initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
f5 to f18 ^{Sleeve (PET : Black)}
Vent
L'
(except F5)
15min.
4min.
(F5 to F10)
(F12.5 to F18)
Gas escape end seal
]f20
Sleeve (PET : Black)
Vent
L'
15min.
4min.
fD 5 6.3 8 10 12.5 16 18 20 22
fd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 10.0
fD'
FD+0.5max.
FD+0.5max.
L'
L+1.5max.
L+2.0max.
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E SMG AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 1.0MF:1R0,10MF:100,100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3,100V:101,315V:3B1)
Series code
Category
Please refer to "Product code guide
(radial lead type)"
(1/4)
CAT. No. E1001K