EMLA250ADA330MF61G Datasheet, PDF (1/3 Pages) Nippon Precision Circuits Inc – SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105C
@Low impedance, long life
@Rated voltage 6.3 to 50V, Capacitance 10 to 1,000MF
@Case size F5B5.8L to F10B10L
@Suitable for applications requiring long life and low impedance such as
equipment in continuous operation, industrial applications, etc.
@Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
@RoHS Compliant
Longer life
MVY
MLA
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +105C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. impedance Ratio)
Endurance
Shelf life
6.3 to 50Vdc
P20%(M)
(20C, 120Hz)
I=0.01CV or 3MA, whichever is greater
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 2 minutes)
Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V
E61 to F61 0.28 0.24 0.22 0.16 0.13 0.12
tanE (Max.) F80
0.32 0.27 0.24 0.16 0.13 0.12
HA0 to JA0 0.28 0.24 0.22 0.16 0.13 0.12
(20C, 120Hz)
Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V
Z(-25C)/Z(+20C)
432222
Z(-40C)/Z(+20C)
10 7 5 3 3 3
(120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 3,000 hours
at 105C.
Capacitance change [P30% of the initial value
D.F. (tanE)
[300% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P30% of the initial value
D.F. (tanE)
[300% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : A
W
0.3max.
AP0.2
LP0.3 (Note)
Note : LP0.5 for HA0 and JA0
Size code D L A B C
W
P
E61
5 5.8 5.3 5.3 5.9 0.5 to 0.8 1.4
F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9
F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0
10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MLA AAA A DA AAA M AAA G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 10MF:100,100MF:101)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3,10V:100,50V:500)
Series code
Category
Please refer to "Product code guide (surface mount type)"
?MARKING
EX) 16V100MF
4R
100
C^LA
@Rated voltage symbol
Rated voltage (Vdc) Symbol
6.3
j
10
A
16
C
25
E
35
V
50
H
(1/2)
CAT. No. E1001K