CF5015 Datasheet, PDF (1/10 Pages) Nippon Precision Circuits Inc – 2.5V Operation Fundamental Frequency Crystal Oscillator Module ICs

CF5015 series
2.5V Operation Fundamental Frequency
Crystal Oscillator Module ICs
OVERVIEW
The CF5015 series are 2.5V operation crystal oscillator ICs. They are available for frequencies up to 60MHz.
The product lineup consists of AL× series for 2.5V exclusive use and BL× series compliant with 2.5V to 5V.
The built-in oscillator capacitor of AL× series is large, so that AL× series contribute to improve the frequency
stability. For the BL× series, the current consumption and drive level reduced so that they can realize the char-
acteristics easier to design small-sized crystal oscillators. The oscillator circuit of each version is simply con-
structed, so that it can realize the crystal oscillator with excellent phase noise characteristics. Even if the valued
characteristics differ due to the application or the purpose, the selecting from these series for different purposes
allows the optimization.
FEATURES
I Operating supply voltage range
• CF5015AL×: 2.25 to 2.75V
• CF5015BL×: 2.25 to 5.5V
I Up to 60MHz oscillation frequency range
I – 40 to 85°C operating temperature range
I Oscillation capacitors built-in
• CF5015AL×: C_G = 18pF, C_D = 18pF
• CF5015BL×: C_G = 4pF, C_D = 8pF
I Inverter amplifier feedback resistor built-in
I Standby function
• High impedance in standby mode, oscillator stops
I Low standby current
• Power-saving pull-up resistor built-in
I f_O, f_O/2, f_O/4, f_O/8, or f_O/16 output frequency,
determined by internal connection
I CMOS output duty level (1/2VDD)
I Molybdenum-gate CMOS process
I Chip form (CF5015×L×)
SERIES CONFIGURATION
Version
CF5015AL1
Operating
supply
voltage
range [V]
Recommended oscillation frequency range^*1 [MHz]
2.5V operation
3V operation
5V
operation
C_L = 15pF C_L = 30pF C_L = 15pF C_L = 30pF C_L = 30pF
Standby mode
Built-in
capacitance [pF]
Output
frequency
Oscillator
stop
C_G
C_D
function
Output
state
f_O*2
CF5015AL2
f _O /2
CF5015AL3 2.25 to 2.75 4 to 60 4 to 50
–
–
–
18
18
f _O /4
Yes
Hi-Z
CF5015AL4
f _O /8
CF5015AL5
f _O /16
CF5015BL1
f_O*2
CF5015BL2
f _O /2
CF5015BL3
2.25 to 3.6
4.5 to 5.5
12 to 60
12 to 50
12 to 60
12 to 50
12 to 60
4
8
f _O /4
Yes
Hi-Z
CF5015BL4
f _O /8
CF5015BL5
f _O /16
*1. The recommended oscillation frequency is a yardstick value derived from the crystal used for NPC characteristics authentication. However, the oscil-
lator frequency band is not guaranteed. Specifically, the characteristics can vary greatly due to crystal characteristics and mounting conditions, so the
oscillation characteristics of components must be carefully evaluated.
*2. Oscillation frequency
ORDERING INFORMATION
Device
CF5015×L×–2
Package
Chip form
SEIKO NPC CORPORATION —1