EB2011-A-J20 Datasheet, PDF (9/9 Pages) Nihon Kaiheiki Industry Co. Ltd. – Light Touch Miniature Pushbuttons

Light Touch Miniature Pushbuttons Series EB
LEGENDS
General information and basic specifications are presented here for customers who want to do their own legends.
ON
FILTEARIR
Suggested Printable Area for Cap
Recommended Print Method:
Screen Print or Pad Print
Epoxy based ink is recommended.
(0.38) Typ
.015
(4.61) Typ
.181
(9.98) Sq
.393
(11.5) Sq
.453
(0.76) Typ
.030
(0.76) Typ
.030
(9.98)
.393
(11.5) Sq
.453
(0.76) Typ
.030
AT465
AT465
Shaded areas are printable areas.
Additional Method
An additional method for legends is engraving the cap. Maximum depth for engraving is .012” (0.3mm) on the cap.
Enamel paint is recommended to fill the engraved area.
LEGEND PACKET FOR ORDERING CAPS WITH LEGENDS
1. To order caps with legends, contact the factory and request the EB Legend Packet.
2. Once you determine your desired legend, fill out the ordering work sheet included in the packet.
3. Return the completed work sheet to receive a quotation.
NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone] • www.nkkswitches.com
02-08